All models

Eiffel Tower: Step-by-step building instructions

A tall brick tower inspired by the Eiffel Tower in Paris, with four splayed open-truss legs, arches under the first floor, a lattice second stage, a slender spire with its top cabin, and a paved plaza ringed by gardens.

426 parts 35 steps Expert

Eiffel Tower assembled model

Loading 3D model Check your connection and try again.

Drag to rotate. Pinch or scroll to zoom.

Build steps

Finished model

Drag to look around, then build it in 35 steps.

Step 1 of 35

  1. Step 1 · 4 pieces

    • Baseplate 16 x 16 Green 3867 4×

About this build

Four legs, two platforms and a needle: that outline is enough to name the Eiffel Tower. The real one is a wrought-iron lattice tower on the Champ de Mars in Paris, built for the 1889 World's Fair, and this model chases its silhouette before anything else.

Each leg starts on a dark gray masonry pier and climbs as an open truss: a 4 x 4 plate, four 1 x 1 corner posts, then the next plate one stud further in. Six of those segments (steps 4 to 10) give the legs their inward lean, and you can see straight through them. Halfway up, in step 8, four 1 x 12 x 3 arches land on the leg posts, one on each face, so their curved tops meet the underside of the first floor.

Above the first floor the build gets slimmer. The second stage legs are stacks of 1 x 2 technic bricks whose holes stand in for rivets, with square-lattice fence panels between them. Past the second floor, the tower narrows from a 6 x 6 technic ring to a 4 x 4 shaft of lattice fences and open window frames, then to a 2 x 2 column that alternates technic and grille bricks. A small cabin and a red and white antenna finish the top.

Reddish brown carries the whole tower so it stands out against the light gray plaza and the green gardens, where tan paths, low hedges and topiary trees fill the border.

At a glance

  • 426 parts in 35 steps on a 32 x 32 stud base
  • Tower footprint 24 x 24 studs, a little under 50 cm to the antenna tip
  • Expect about three to four hours of building

Step 1 of 35

Every piece is a standard LEGO® element, listed with its LDraw part number and color.

Parts list
PartName / IDColorQty
Baseplate 16 x 163867 Green 4
Cone 2 x 2 x 2 with Hollow Stud Open3942c Green 16
Brick 1 x 1 Round with Hollow Stud3062b Red 1
Cone 1 x 14589 Red 1
Brick 1 x 1 Round with Hollow Stud3062b White 2
Tile 2 x 2 with Groove3068b Tan 16
Brick 1 x 2 with Grille2877 Reddish Brown 24
Brick 2 x 23003 Reddish Brown 1
Brick 1 x 13005 Reddish Brown 100
Plate 2 x 23022 Reddish Brown 9
Plate 4 x 103030 Reddish Brown 1
Plate 4 x 43031 Reddish Brown 30
Plate 6 x 103033 Reddish Brown 1
Plate 6 x 83036 Reddish Brown 2
Brick 1 x 1 Round with Hollow Stud3062b Reddish Brown 12
Fence Ornamented 1 x 4 x 2 with Square Lattice32932 Reddish Brown 24
Fence Lattice 1 x 4 x 13633 Reddish Brown 12
Technic Brick 1 x 2 with Hole3700 Reddish Brown 76
Technic Brick 1 x 4 with Holes3701 Reddish Brown 4
Technic Brick 1 x 6 with Holes3894 Reddish Brown 4
Plate 6 x 63958 Reddish Brown 2
Plate 8 x 841539 Reddish Brown 6
Dish 2 x 2 Inverted4740 Reddish Brown 1
Window 1 x 2 x 2 without Sill60592 Reddish Brown 8
Arch 1 x 12 x 36108 Reddish Brown 4
Plate 8 x 841539 Light Bluish Grey 9
Brick 2 x 43001 Dark Bluish Grey 8
Brick 1 x 83008 Dark Green 8
Brick 1 x 43010 Dark Green 4
Brick 1 x 33622 Dark Green 4
Brick 2 x 2 Round without Reinforcement3941 Dark Green 16
Brick 1 x 1 Round with Hollow Stud3062b Dark Brown 16
Total pieces426