All models

Clock Tower: Step-by-step building instructions

A slender European town clock tower with a stone base, a red-brick shaft with stone quoins, clock faces on two sides, a railed gallery, an open belfry with a bell and a pointed copper-green spire.

200 parts 17 steps Intermediate

Clock Tower assembled model

Loading 3D model Check your connection and try again.

Drag to rotate. Pinch or scroll to zoom.

Build steps

Finished model

Drag to look around, then build it in 17 steps.

Step 1 of 17

  1. Step 1 · 4 pieces

    • Tile 1 x 4 with Groove Light Bluish Grey 2431 1×
    • Tile 2 x 4 Light Bluish Grey 87079 2×
    • Baseplate 16 x 16 Dark Bluish Grey 3867 1×

About this build

Many European market squares, from Flanders to northern Italy, grew up around one tall tower that told the town the time. It usually rises in clear stages: a solid stone foot with the door, a long plain shaft, a clock stage near the top, an open room for the bell, and a spire that shows from far down the street.

This build follows those stages in 200 parts and 17 steps. The light grey stone base holds a tall white-framed door. Above it, a four-stud dark red shaft is tied together by stone quoins: single grey bricks at the corners on every other course, the detail that makes it read as brick and stone rather than one flat colour. A grey plate string course splits the shaft, and white windows face all four directions.

A plate stepping out by one stud carries the wider clock stage. Two printed clock bricks sit in it, one on the front and one on the left side, so both faces show from the usual corner view. The gallery above is an 8 × 8 plate with black railings and gold post caps. Inside the arches a gold bell hangs from the roof plate, and the spire starts with a gentle 45° flare before four steep 75° corner slopes and a pointed cap lift it to a gold finial.

Below, a 16 × 16 square adds a path, two lamp posts, two benches and four planters.

Where to slow down

  • Step 10: each clock brick has its face on one side only. Check it points outward before pressing it down.
  • Steps 14 and 15: the corner slopes are four copies of one part, each turned a quarter further.

Most builders will need about 60 to 90 minutes.

Step 1 of 17

Every piece is a standard LEGO® element, listed with its LDraw part number and color.

Parts list
PartName / IDColorQty
Brick 1 x 1 x 5 with Solid Stud2453b Black 2
Brick 2 x 23003 Black 1
Brick 1 x 23004 Black 4
Brick 1 x 1 Round with Hollow Stud3062b Black 4
Fence Lattice 1 x 4 x 13633 Black 6
Cone 1 x 14589 Black 2
Plant Flower 2 x 2 Leaves4727 Green 4
Brick 2 x 2 with Gold and White Big Ben Clock Face Pattern3003p0b White 2
Window 1 x 2 x 2 without Sill60592 White 6
Door 1 x 4 x 6 Frame60596 White 1
Brick 1 x 1 Round with Hollow Stud3062b Trans Yellow 2
Glass for Window 1 x 2 x 2 without Sill60601 Trans Clear 6
Tile 1 x 4 with Groove2431 Reddish Brown 2
Plate 2 x 43020 Reddish Brown 2
Fence Lattice 1 x 4 x 13633 Reddish Brown 2
Door 1 x 4 x 6 with 4 Panes and Stud Handle60623 Reddish Brown 1
Tile 1 x 4 with Groove2431 Light Bluish Grey 1
Brick 1 x 23004 Light Bluish Grey 4
Brick 1 x 13005 Light Bluish Grey 42
Brick 1 x 63009 Light Bluish Grey 7
Brick 1 x 43010 Light Bluish Grey 7
Plate 4 x 43031 Light Bluish Grey 1
Brick 2 x 2 Round without Reinforcement3941 Light Bluish Grey 4
Plate 6 x 63958 Light Bluish Grey 2
Plate 8 x 841539 Light Bluish Grey 2
Arch 1 x 4 x 26182 Light Bluish Grey 4
Tile 2 x 487079 Light Bluish Grey 2
Baseplate 16 x 163867 Dark Bluish Grey 1
Brick 2 x 2 Round without Reinforcement3941 Pearl Gold 1
Cone 1 x 14589 Pearl Gold 1
Tile 1 x 1 Round with Groove98138 Pearl Gold 4
Brick 1 x 23004 Dark Red 22
Brick 1 x 13005 Dark Red 17
Brick 1 x 43010 Dark Red 15
Brick 1 x 33622 Dark Red 1
Brick 2 x 43001 Sand Green 2
Slope Brick 45 2 x 43037 Sand Green 4
Slope Brick 45 2 x 2 Double Convex3045 Sand Green 4
Slope Brick 75 2 x 2 x 3 Double Convex3685 Sand Green 4
Slope Brick 75 2 x 2 x 2 Quadruple Convex3688 Sand Green 1
Total pieces200