All models

Arc de Triomphe: Step-by-step building instructions

An original build inspired by the Arc de Triomphe in Paris, with a cream stone arch, a tall central vault, side passages, sculpture groups, a carved frieze and an attic, on a round plaza with avenues and trees.

289 parts 22 steps Advanced

Arc de Triomphe assembled model

Loading 3D model Check your connection and try again.

Drag to rotate. Pinch or scroll to zoom.

Build steps

Finished model

Drag to look around, then build it in 22 steps.

Step 1 of 22

  1. Step 1 · 8 pieces

    • Baseplate 16 x 16 Green 3867 4×
    • Plate 8 x 8 Light Bluish Grey 41539 4×

About this build

Twelve avenues meet at the Place Charles de Gaulle in Paris, and at the centre of that star stands the Arc de Triomphe, a Neoclassical triumphal arch begun under Napoleon and finished in 1836. Beneath its vault lies the Tomb of the Unknown Soldier, where a flame is rekindled every evening. This original build borrows the arch's chunky, almost cubic outline rather than copying it stone for stone.

The block is 16 studs wide, 8 deep and roughly as tall as it is wide, all in tan so it reads as one mass of cream stone. Eight 1 × 6 × 2 arches stand in a row through the full depth to form the central barrel vault. Each pier is a hollow shell pierced by a smaller side passage, crowned with 1 × 4 × 2 arches on both faces. Higher up, a ring of grille bricks stands in for the carved frieze, and a row of round bricks gives the attic its line of shields.

At a glance

  • 289 parts in 22 steps, on a 32 × 32 stud base
  • Arch footprint: 16 × 8 studs on an 18 × 12 dark grey plinth
  • Grey ring road and four avenue stubs, with eight clipped trees
  • A small slab with a trans-orange flame sits under the vault

The piers are the part to watch. In steps 5 to 8 the inner and outer walls leave a two-stud gap for the side passage, and the side arches in step 8 only line up if those gaps stay centred. Step 12 is the satisfying one: the vault goes on in a single row, and from then on the build is quick. Expect about one and a half to two hours.

Step 1 of 22

Every piece is a standard LEGO® element, listed with its LDraw part number and color.

Parts list
PartName / IDColorQty
Plate 1 x 2 with Groove with 1 Centre Stud3794b Black 1
Baseplate 16 x 163867 Green 4
Plant Flower 2 x 2 Leaves4727 Green 8
Brick 1 x 2 with Grille2877 Tan 26
Brick 1 x 23004 Tan 30
Brick 1 x 13005 Tan 12
Brick 1 x 83008 Tan 12
Brick 1 x 63009 Tan 26
Brick 1 x 43010 Tan 16
Plate 4 x 63032 Tan 6
Brick 1 x 1 Round with Hollow Stud3062b Tan 28
Brick 1 x 2 x 2 without Understud3245c Tan 12
Arch 1 x 6 x 2 with Thick Top and Reinforced Underside3307 Tan 8
Brick 1 x 33622 Tan 8
Plate 6 x 63958 Tan 6
Tile 1 x 84162 Tan 4
Arch 1 x 4 x 26182 Tan 4
Tile 1 x 66636 Tan 12
Panel 1 x 2 x 2 Reinforced87552 Tan 4
Cone 1 x 14589 Trans Orange 1
Brick 1 x 1 Round with Hollow Stud3062b Reddish Brown 16
Plate 2 x 43020 Light Bluish Grey 1
Plate 8 x 841539 Light Bluish Grey 4
Plate 2 x 43020 Dark Bluish Grey 4
Plate 4 x 43031 Dark Bluish Grey 4
Plate 2 x 103832 Dark Bluish Grey 8
Plate 6 x 63958 Dark Bluish Grey 6
Tile 2 x 2 with Groove3068b Very Light Bluish Grey 1
Tile 1 x 2 with Groove3069b Very Light Bluish Grey 1
Brick 2 x 2 Round without Reinforcement3941 Dark Green 16
Total pieces289