All models

Washington Monument: Step-by-step building instructions

An original build inspired by the Washington Monument, a slender two-tone white obelisk with a pointed cap on a round green lawn, ringed by twelve flags and a tan path with walks out to the park edges.

112 parts 14 steps Beginner

Washington Monument assembled model

Loading 3D model Check your connection and try again.

Drag to rotate. Pinch or scroll to zoom.

Build steps

Finished model

Drag to look around, then build it in 14 steps.

Step 1 of 14

  1. Step 1 · 4 pieces

    • Baseplate 16 x 16 Green 3867 1×
    • Plate 6 x 8 Bright Green 3036 1×
    • Plate 1 x 6 Bright Green 3666 2×

About this build

A plain white needle rising over a lawn is one of the most recognizable shapes in Washington, D.C. The Washington Monument is a tall stone obelisk on the National Mall, finished with a small pyramid at the top and circled at its foot by a ring of American flags. This build keeps exactly those ingredients and leaves everything else out.

The shaft is a single stack of seventeen 2×2 bricks, so the model is about ten times taller than it is wide, close to the real proportions. The real monument shows a change in stone shade part of the way up; here the lowest six bricks are very light bluish grey and the rest are white, which gives the same quiet seam. A steep 75-degree quadruple convex slope makes the pointed cap.

Around the base, a grey plaza sits on a stepped disc of bright green plates, a rounded lawn on the darker green park. Twelve light grey poles stand on its edge, each flying a small flag built from four plates: a red and a white stripe with a blue canton at the top corner. A tan ring path and four short walks to the edges frame the scene.

At a glance

  • 112 parts in 14 steps
  • 16 × 16 stud baseplate, about 20 bricks tall
  • Beginner level; most builders need about 30–45 minutes

Steps 6 to 8 are simple stacking, but press each brick down firmly so the tower stays straight. The flag steps repeat the same small pattern twelve times, which makes them a good job for a younger helper. For a variation, swap the flags for green round plates and cones to plant a circle of trees instead.

Step 1 of 14

Every piece is a standard LEGO® element, listed with its LDraw part number and color.

Parts list
PartName / IDColorQty
Plate 1 x 13024 Blue 12
Baseplate 16 x 163867 Green 1
Plate 1 x 23023b Red 12
Plate 1 x 13024 Red 12
Plate 6 x 83036 Bright Green 1
Plate 1 x 83460 Bright Green 2
Plate 1 x 63666 Bright Green 4
Brick 2 x 23003 White 11
Plate 1 x 23023b White 12
Slope Brick 75 2 x 2 x 2 Quadruple Convex3688 White 1
Tile 2 x 2 with Groove3068b Tan 8
Tile 1 x 84162 Tan 4
Brick 1 x 1 Round with Hollow Stud3062b Light Bluish Grey 24
Plate 6 x 63958 Light Bluish Grey 1
Brick 2 x 23003 Very Light Bluish Grey 6
Plate 4 x 43031 Very Light Bluish Grey 1
Total pieces112