All models

Lincoln Memorial: Step-by-step building instructions

An original build inspired by the Lincoln Memorial in Washington, D.C. A white colonnaded temple on a stepped marble platform with wide front stairs, a seated statue inside and a long reflecting pool between lawns and trees.

173 parts 18 steps Intermediate

Lincoln Memorial assembled model

Loading 3D model Check your connection and try again.

Drag to rotate. Pinch or scroll to zoom.

Build steps

Finished model

Drag to look around, then build it in 18 steps.

Step 1 of 18

  1. Step 1 · 20 pieces

    • Plate 6 x 8 Green 3036 10×
    • Plate 8 x 8 Green 41539 10×

About this build

At the west end of the National Mall in Washington, D.C., the Lincoln Memorial looks like a Greek temple: a long white hall wrapped in columns, raised on a broad platform, with a seated statue of Abraham Lincoln inside and the Reflecting Pool stretching away from its steps. This original build keeps that layout and simplifies the rest.

The memorial is almost entirely white. A thin plate platform and a brick band form the stepped podium, and a wide staircase of four plate treads climbs the front. Twenty tall round columns stand around the hall, eight across the front, carrying a brick ring, a cornice plate that overhangs by one stud, and a plain two-course attic under a flat roof. Behind the columns sits a walled chamber with a wide opening. Look through the middle gap in the front row and you can see a simple white seated figure on a dark grey plinth, set against a grey back panel so it stands out. It is a block shape, not a portrait.

In front, a long blue pool with a light grey rim runs down the middle of the lawn, with pale walkways and two rows of round trees on either side.

At a glance

  • 173 parts in 18 steps
  • Lawn of 28 × 40 studs; the memorial is 26 × 14 studs at its base
  • Roughly 60–90 minutes for most builders

The tricky part is the colonnade. In steps 12 and 13, every column has to stand on the right stud, or the architrave in step 14 will not sit flat. Count the studs from the corners and check that the front gaps are two studs wide. For a quieter scene, leave out the trees.

Step 1 of 18

Every piece is a standard LEGO® element, listed with its LDraw part number and color.

Parts list
PartName / IDColorQty
Tile 2 x 487079 Blue 8
Plate 6 x 83036 Green 10
Plate 8 x 841539 Green 10
Brick 1 x 2 x 5 with Blocked Open Studs and Symmetric Inner Ridges2454b White 4
Brick 2 x 23003 White 1
Brick 1 x 23004 White 1
Brick 1 x 83008 White 20
Brick 1 x 63009 White 11
Brick 1 x 43010 White 2
Plate 4 x 63032 White 1
Plate 2 x 83034 White 1
Plate 4 x 83035 White 2
Plate 6 x 83036 White 17
Brick 1 x 1 Round with Hollow Stud3062b White 1
Brick 1 x 33622 White 2
Brick 1 x 6 x 53754 White 4
Plate 1 x 2 with Groove with 1 Centre Stud3794b White 1
Plate 2 x 63795 White 1
Plate 2 x 103832 White 3
Plate 6 x 63958 White 1
Plate 8 x 841539 White 3
Brick 1 x 1 x 6 Round with Square Base43888 White 20
Plate 1 x 104477 White 3
Brick 1 x 106111 White 5
Brick 1 x 13005 Reddish Brown 8
Tile 2 x 2 with Groove3068b Light Bluish Grey 1
Brick 1 x 6 x 53754 Light Bluish Grey 1
Tile 1 x 84162 Light Bluish Grey 4
Tile 1 x 66636 Light Bluish Grey 2
Tile 2 x 487079 Light Bluish Grey 2
Brick 2 x 43001 Dark Bluish Grey 1
Tile 1 x 4 with Groove2431 Very Light Bluish Grey 2
Tile 1 x 84162 Very Light Bluish Grey 4
Cylinder 2 x 2 with Dome Top with Blocked Stud30367a Dark Green 8
Brick 2 x 2 Round without Reinforcement3941 Dark Green 8
Total pieces173