US Capitol: Step-by-step building instructions
An original build inspired by the United States Capitol, with a tiered white dome on a ring of columns, a pedimented portico above wide stone steps, two lower wings and a tree-lined lawn.
225 parts 24 steps Advanced
Loading 3D model Check your connection and try again.
Drag to rotate. Pinch or scroll to zoom.
Build steps
Finished model
Drag to look around, then build it in 24 steps.
Step 1 of 24
-
Step 1 · 4 pieces
-
Baseplate 16 x 16 4×
-
-
Step 2 · 6 pieces
-
Plate 6 x 8 1× -
Plate 6 x 6 2× -
Plate 8 x 8 3×
-
-
Step 3 · 11 pieces
Tip Each tread is one plate higher and two studs shallower than the one below. The portico floor is the top tread, so the columns in step 14 stand three plates above the lawn.
-
Plate 4 x 6 2× -
Plate 2 x 6 2× -
Tile 2 x 4 7×
-
-
Step 4 · 10 pieces
Tip Hang the dark door leaf on the left side of the door frame. The frame is six bricks tall, so it reaches the top of both stories in one piece.
-
Window 1 x 2 x 3 without Sill 2× -
Brick 1 x 1 x 3 4× -
Door 1 x 4 x 6 Frame 1× -
Glass for Window 1 x 2 x 3 2× -
Door 1 x 4 x 6 with 4 Panes and Stud Handle 1×
-
-
Step 5 · 7 pieces
-
Brick 1 x 2 x 3 without Understud 2× -
Brick 1 x 4 x 3 5×
-
-
Step 6 · 13 pieces
-
Window 1 x 2 x 3 without Sill 3× -
Brick 1 x 1 x 3 4× -
Brick 1 x 2 x 3 without Understud 1× -
Brick 1 x 4 x 3 2× -
Glass for Window 1 x 2 x 3 3×
-
-
Step 7 · 13 pieces
-
Window 1 x 2 x 3 without Sill 3× -
Brick 1 x 1 x 3 4× -
Brick 1 x 2 x 3 without Understud 1× -
Brick 1 x 4 x 3 2× -
Glass for Window 1 x 2 x 3 3×
-
-
Step 8 · 12 pieces
-
Window 1 x 2 x 3 without Sill 2× -
Brick 1 x 1 x 3 4× -
Brick 1 x 2 x 3 without Understud 2× -
Brick 1 x 4 x 3 2× -
Glass for Window 1 x 2 x 3 2×
-
-
Step 9 · 10 pieces
-
Window 1 x 2 x 3 without Sill 3× -
Brick 1 x 1 x 3 2× -
Brick 1 x 2 x 3 without Understud 2× -
Glass for Window 1 x 2 x 3 3×
-
-
Step 10 · 17 pieces
-
Window 1 x 2 x 2 without Sill 3× -
Brick 1 x 1 8× -
Brick 1 x 8 2× -
Brick 1 x 2 x 2 without Understud 1× -
Glass for Window 1 x 2 x 2 without Sill 3×
-
-
Step 11 · 17 pieces
-
Window 1 x 2 x 2 without Sill 3× -
Brick 1 x 1 8× -
Brick 1 x 8 2× -
Brick 1 x 2 x 2 without Understud 1× -
Glass for Window 1 x 2 x 2 without Sill 3×
-
-
Step 12 · 10 pieces
Tip Each wing roof is a single 6 x 8 plate. Press the two lattice fences onto its front and back edges, leaving the middle studs open.
-
Plate 6 x 8 2× -
Fence Lattice 1 x 4 x 1 8×
-
-
Step 13 · 8 pieces
-
Brick 1 x 1 Round with Hollow Stud 4× -
Brick 1 x 1 Round with Hollow Stud 2× -
Brick 1 x 8 2×
-
-
Step 14 · 6 pieces
-
Brick 1 x 1 x 6 Round with Square Base 6×
-
-
Step 15 · 4 pieces
Tip The two front plates rest only on the column tops, one stud row deep. Press them down over all six columns at once so none tilts.
-
Plate 2 x 4 1× -
Plate 2 x 8 1× -
Plate 4 x 8 1× -
Plate 8 x 8 1×
-
-
Step 16 · 6 pieces
-
Brick 2 x 6 1× -
Slope Brick 45 2 x 2 Double 1× -
Slope Brick 33 3 x 2 4×
-
-
Step 17 · 4 pieces
-
Plate 8 x 8 Round with Hole and Snapstud 1× -
Brick 4 x 4 Round with Pinhole and Snapstud 3×
-
-
Step 18 · 12 pieces
Tip Place the eight columns at the four sides first, two per side, then the four diagonal ones. All twelve sit on the outer studs of the round plate around the grey core.
-
Brick 1 x 1 Round with Hollow Stud 12×
-
-
Step 19 · 12 pieces
-
Brick 1 x 1 Round with Hollow Stud 12×
-
-
Step 20 · 12 pieces
-
Brick 1 x 1 Round with Hollow Stud 12×
-
-
Step 21 · 3 pieces
-
Brick 6 x 6 Round with Holes 1× -
Dish 6 x 6 Inverted with Hollow Studs 1× -
Plate 8 x 8 Round with Hole and Snapstud 1×
-
-
Step 22 · 6 pieces
Tip The upper dish has a single centre stud. The lantern and the statue stack on it in a straight line, so check from the front and the side that it stands upright.
-
Brick 1 x 1 Round with Hollow Stud 2× -
Dish 4 x 4 Inverted 1× -
Cone 1 x 1 1× -
Brick 4 x 4 Round with Pinhole and Snapstud 1× -
Brick 1 x 1 Round with Hollow Stud 1×
-
-
Step 23 · 16 pieces
-
Brick 2 x 2 Round without Reinforcement 8× -
Dish 4 x 4 Inverted 4× -
Brick 4 x 4 Round with Pinhole and Snapstud 4×
-
-
Step 24 · 6 pieces
-
Brick 2 x 2 Round without Reinforcement 2× -
Cone 4 x 4 x 2 with Axlehole 4×
-
About this build
On Capitol Hill in Washington, D.C., the United States Capitol houses Congress: the Senate in one wing, the House of Representatives in the other, and a great white dome rising over the middle. This original build follows that symmetric plan and lets the dome do most of the talking.
The building sits on a light grey terrace plinth, so the white walls separate cleanly from the green lawn. Three plate treads climb to the portico, where six tall round columns with square bases carry a plate entablature and a low pediment made from 33-degree slopes, a 2 x 6 brick and a double-slope ridge. Black window frames with clear glass run along both stories of the central block and the two lower wings, and a white lattice fence lines each wing roof.
The dome is a stack of round parts. An 8 x 8 round plate carries a ring of twelve round 1 x 1 columns, three bricks tall, around a dark grey core that reads as the shaded drum behind the colonnade. Above it come a second round plate, a 6 x 6 round brick, a 6 x 6 dish, a 4 x 4 round brick and a 4 x 4 dish, then a slim lantern topped by a dark brown statue.
At a glance
- 225 parts in 24 steps
- Footprint: 32 x 32 studs on four baseplates
- Building: 28 studs wide; the statue stands nearly three times as high as the walls
- Estimated build time: roughly 1.5 to 2 hours
Steps 18 to 20 repeat the same twelve column positions three times, so take care with the first ring. If you have spare round bricks, a fourth ring makes the drum even taller.
Parts list
How to read these instructionsEvery piece is a standard LEGO® element, listed with its LDraw part number and color.
| Part | Name / ID | Color | Qty |
|---|---|---|---|
| Brick 1 x 1 Round with Hollow Stud3062b | Black | 4 | |
| Window 1 x 2 x 2 without Sill60592 | Black | 6 | |
| Window 1 x 2 x 3 without Sill60593 | Black | 13 | |
| Baseplate 16 x 163867 | Green | 4 | |
| Brick 1 x 1 x 314716 | White | 18 | |
| Brick 6 x 6 Round with Holes18897 | White | 1 | |
| Brick 1 x 2 x 3 without Understud22886 | White | 8 | |
| Brick 2 x 62456 | White | 1 | |
| Brick 1 x 13005 | White | 16 | |
| Brick 1 x 83008 | White | 4 | |
| Plate 2 x 43020 | White | 1 | |
| Plate 2 x 83034 | White | 1 | |
| Plate 4 x 83035 | White | 1 | |
| Plate 6 x 83036 | White | 2 | |
| Slope Brick 45 2 x 2 Double3043 | White | 1 | |
| Brick 1 x 1 Round with Hollow Stud3062b | White | 38 | |
| Brick 1 x 2 x 2 without Understud3245c | White | 2 | |
| Slope Brick 33 3 x 23298 | White | 4 | |
| Fence Lattice 1 x 4 x 13633 | White | 8 | |
| Dish 4 x 4 Inverted3960 | White | 1 | |
| Plate 8 x 841539 | White | 1 | |
| Brick 1 x 1 x 6 Round with Square Base43888 | White | 6 | |
| Dish 6 x 6 Inverted with Hollow Studs44375a | White | 1 | |
| Cone 1 x 14589 | White | 1 | |
| Brick 1 x 4 x 349311 | White | 11 | |
| Door 1 x 4 x 6 Frame60596 | White | 1 | |
| Plate 8 x 8 Round with Hole and Snapstud74611 | White | 2 | |
| Brick 4 x 4 Round with Pinhole and Snapstud87081 | White | 1 | |
| Brick 1 x 1 Round with Hollow Stud3062b | Trans Yellow | 2 | |
| Glass for Window 1 x 2 x 2 without Sill60601 | Trans Clear | 6 | |
| Glass for Window 1 x 2 x 360602 | Trans Clear | 13 | |
| Brick 2 x 2 Round without Reinforcement3941 | Reddish Brown | 10 | |
| Plate 4 x 63032 | Light Bluish Grey | 2 | |
| Plate 6 x 83036 | Light Bluish Grey | 1 | |
| Plate 2 x 63795 | Light Bluish Grey | 2 | |
| Plate 6 x 63958 | Light Bluish Grey | 2 | |
| Plate 8 x 841539 | Light Bluish Grey | 3 | |
| Tile 2 x 487079 | Light Bluish Grey | 7 | |
| Brick 4 x 4 Round with Pinhole and Snapstud87081 | Dark Bluish Grey | 3 | |
| Brick 1 x 83008 | Dark Green | 2 | |
| Cone 4 x 4 x 2 with Axlehole3943b | Dark Green | 4 | |
| Dish 4 x 4 Inverted3960 | Dark Green | 4 | |
| Brick 4 x 4 Round with Pinhole and Snapstud87081 | Dark Green | 4 | |
| Brick 1 x 1 Round with Hollow Stud3062b | Dark Brown | 1 | |
| Door 1 x 4 x 6 with 4 Panes and Stud Handle60623 | Dark Brown | 1 | |
| Total pieces | 225 | ||