Statue of Liberty: Step-by-step building instructions
A tall brick statue inspired by the Statue of Liberty, in copper green with a raised golden torch, a tablet and a seven-ray crown, standing on a stone pedestal over a star-shaped fort on a small island.
234 parts 20 steps Advanced
Loading 3D model Check your connection and try again.
Drag to rotate. Pinch or scroll to zoom.
Build steps
Finished model
Drag to look around, then build it in 20 steps.
Step 1 of 20
-
Step 1 · 7 pieces
-
Baseplate 16 x 16 1× -
Plate 6 x 6 4× -
Plate 1 x 2 2×
-
-
Step 2 · 10 pieces
-
Tile 1 x 2 with Groove 1× -
Tile 1 x 1 with Groove 1× -
Tile 1 x 1 Round with Groove 8×
-
-
Step 3 · 16 pieces
-
Brick 1 x 2 4× -
Brick 1 x 1 4× -
Brick 2 x 8 4× -
Brick 1 x 4 4×
-
-
Step 4 · 16 pieces
Tip Turn the four long bricks of this course across the ones below so the two fort courses lock together.
-
Brick 1 x 2 4× -
Brick 1 x 1 4× -
Brick 2 x 8 4× -
Brick 1 x 4 4×
-
-
Step 5 · 16 pieces
-
Brick 1 x 2 4× -
Brick 1 x 1 4× -
Brick 1 x 4 4× -
Tile 1 x 8 2× -
Tile 1 x 6 2×
-
-
Step 6 · 26 pieces
-
Brick 1 x 1 Round with Hollow Stud 7× -
Plate 1 x 1 Round 7× -
Brick 1 x 1 Round with Hollow Stud 4× -
Brick 1 x 1 Round with Hollow Stud 4× -
Cone 1 x 1 4×
-
-
Step 7 · 8 pieces
-
Brick 1 x 6 4× -
Brick 1 x 4 4×
-
-
Step 8 · 12 pieces
-
Brick 1 x 1 8× -
Arch 1 x 4 x 2 4×
-
-
Step 9 · 5 pieces
-
Brick 1 x 6 2× -
Brick 1 x 4 2× -
Plate 8 x 8 1×
-
-
Step 10 · 5 pieces
-
Brick 1 x 6 2× -
Brick 1 x 4 2× -
Plate 6 x 6 1×
-
-
Step 11 · 5 pieces
Tip All four hem slopes face outward, away from the 2 x 2 core brick. The longer slopes go on the front and back.
-
Brick 2 x 2 1× -
Slope Brick 45 2 x 4 2× -
Slope Brick 45 2 x 2 2×
-
-
Step 12 · 26 pieces
-
Brick 2 x 2 2× -
Brick 1 x 1 Round with Hollow Stud 24×
-
-
Step 13 · 26 pieces
-
Brick 2 x 2 2× -
Slope Brick 45 2 x 1 1× -
Brick 1 x 1 Round with Hollow Stud 23×
-
-
Step 14 · 31 pieces
Tip The drape slopes face forward and stick out one stud. Check that each one sits right above a round brick or slope from the course below.
-
Brick 2 x 2 3× -
Slope Brick 45 2 x 1 5× -
Brick 1 x 1 Round with Hollow Stud 23×
-
-
Step 15 · 3 pieces
-
Brick 1 x 4 2× -
Slope Brick 45 2 x 4 1×
-
-
Step 16 · 3 pieces
Tip The tall 1 x 2 x 3 tablet hangs from the end of the shoulder brick on the right as you face the front, so press it up into the underside rather than down.
-
Brick 1 x 2 x 3 without Understud 1× -
Brick 1 x 6 1× -
Brick 1 x 4 1×
-
-
Step 17 · 4 pieces
Tip The plate with one centre stud is the trick here: it lets the odd-sized 3 x 3 crown plate sit centered on the round head.
-
Plate 3 x 3 1× -
Brick 2 x 2 Round without Reinforcement 1× -
Plate 2 x 2 Round with Axlehole 1× -
Plate 2 x 2 with Groove with 1 Centre Stud 1×
-
-
Step 18 · 7 pieces
Tip Point the tooth plates outward. Leave the left side next to the raised arm with just one ray, toward the back, so it clears the arm.
-
Plate 1 x 1 with Tooth In-line 7×
-
-
Step 19 · 5 pieces
-
Brick 1 x 1 5×
-
-
Step 20 · 3 pieces
-
Cone 1 x 1 1× -
Brick 1 x 1 Round with Hollow Stud 1× -
Plate 1 x 1 Round 1×
-
About this build
Copper turns green when it weathers, and that soft patina is what most people picture when they think of the figure in New York Harbor. This build is inspired by the Statue of Liberty: a robed woman holding a torch high in her right hand and a tablet in her left, wearing a crown of seven rays, on a granite pedestal that rises out of the star-shaped walls of an old fort on Liberty Island.
Sand green carries the whole statue, 110 of the 234 parts. The robe is a bundle of 1 x 1 round bricks, 70 of them, standing in columns so the light catches each one like a fold of cloth. A flared ring of 45-degree slopes forms the hem, and a stepped line of small slopes climbs across the front as the diagonal drape. The torch arm is a single column of 1 x 1 bricks rising beside the head, finished with a pearl gold cup and a trans-orange flame.
The crown sits on a 2 x 2 plate with one centre stud, which lets a 3 x 3 plate center over a 2 x 2 head. Seven 1 x 1 tooth plates around its edge point outward as the rays.
Below the statue, tan bricks and four arches make the pedestal, capped by a light gray cornice. The fort is simplified to an eight-pointed stepped star (the real walls have eleven points), with bastion tips one course higher than the terrace.
At a glance
- 234 parts in 20 steps on a 16 x 16 stud base
- About 60-90 minutes for most builders, an estimate
- Steps 12 to 14 repeat a lot of round bricks; sort them first
Parts list
How to read these instructionsEvery piece is a standard LEGO® element, listed with its LDraw part number and color.
| Part | Name / ID | Color | Qty |
|---|---|---|---|
| Baseplate 16 x 163867 | Blue | 1 | |
| Brick 1 x 1 Round with Hollow Stud3062b | Green | 7 | |
| Plate 6 x 63958 | Green | 4 | |
| Plate 1 x 1 Round6141 | Bright Green | 7 | |
| Brick 1 x 13005 | Tan | 8 | |
| Brick 1 x 63009 | Tan | 8 | |
| Brick 1 x 43010 | Tan | 8 | |
| Tile 1 x 2 with Groove3069b | Tan | 1 | |
| Tile 1 x 1 with Groove3070b | Tan | 1 | |
| Arch 1 x 4 x 26182 | Tan | 4 | |
| Tile 1 x 1 Round with Groove98138 | Trans Light Blue | 8 | |
| Cone 1 x 14589 | Trans Orange | 1 | |
| Plate 1 x 23023b | Reddish Brown | 2 | |
| Brick 1 x 1 Round with Hollow Stud3062b | Reddish Brown | 4 | |
| Brick 1 x 23004 | Light Bluish Grey | 12 | |
| Brick 1 x 13005 | Light Bluish Grey | 12 | |
| Brick 2 x 83007 | Light Bluish Grey | 8 | |
| Brick 1 x 43010 | Light Bluish Grey | 12 | |
| Plate 6 x 63958 | Light Bluish Grey | 1 | |
| Plate 8 x 841539 | Light Bluish Grey | 1 | |
| Tile 1 x 84162 | Dark Bluish Grey | 2 | |
| Tile 1 x 66636 | Dark Bluish Grey | 2 | |
| Brick 1 x 1 Round with Hollow Stud3062b | Dark Green | 4 | |
| Cone 1 x 14589 | Dark Green | 4 | |
| Brick 1 x 1 Round with Hollow Stud3062b | Pearl Gold | 1 | |
| Plate 1 x 1 Round6141 | Pearl Gold | 1 | |
| Plate 3 x 311212 | Sand Green | 1 | |
| Brick 1 x 2 x 3 without Understud22886 | Sand Green | 1 | |
| Brick 2 x 23003 | Sand Green | 8 | |
| Brick 1 x 13005 | Sand Green | 5 | |
| Brick 1 x 63009 | Sand Green | 1 | |
| Brick 1 x 43010 | Sand Green | 3 | |
| Slope Brick 45 2 x 43037 | Sand Green | 3 | |
| Slope Brick 45 2 x 23039 | Sand Green | 2 | |
| Slope Brick 45 2 x 13040b | Sand Green | 6 | |
| Brick 1 x 1 Round with Hollow Stud3062b | Sand Green | 70 | |
| Brick 2 x 2 Round without Reinforcement3941 | Sand Green | 1 | |
| Plate 2 x 2 Round with Axlehole4032a | Sand Green | 1 | |
| Plate 1 x 1 with Tooth In-line49668 | Sand Green | 7 | |
| Plate 2 x 2 with Groove with 1 Centre Stud87580 | Sand Green | 1 | |
| Total pieces | 234 | ||