Park Bench: Step-by-step building instructions
A classic slatted park bench with curved black cast-iron legs and armrests on a small paved patch, with a round trash bin, a stone planter of red flowers, two park lamps and a low hedge.
104 parts 13 steps Beginner
Loading 3D model Check your connection and try again.
Drag to rotate. Pinch or scroll to zoom.
Build steps
Finished model
Drag to look around, then build it in 13 steps.
Step 1 of 13
-
Step 1 · 8 pieces
-
Baseplate 16 x 16 1× -
Tile 1 x 2 with Groove 1× -
Tile 1 x 8 1× -
Tile 1 x 6 5×
-
-
Step 2 · 16 pieces
Tip Leave the bare studs where the legs, bin and planter go: a 1 x 2 strip each side of the bin and a 1 x 4 cell beside each leg. Count from the curb before pressing tiles down.
-
Tile 1 x 4 with Groove 2× -
Tile 2 x 2 with Groove 12× -
Tile 1 x 2 with Groove 2×
-
-
Step 3 · 2 pieces
Tip Turn both arches so they run front to back. From the side you should look through the curved opening.
-
Arch 1 x 4 x 2 2×
-
-
Step 4 · 4 pieces
-
Plate 1 x 6 4×
-
-
Step 5 · 7 pieces
Tip The seat tiles stop one stud short of each end. Those free studs hold the small arches that become the armrests.
-
Arch 1 x 3 2× -
Tile 1 x 3 2× -
Tile 1 x 4 with Groove 3×
-
-
Step 6 · 10 pieces
Tip Put the two black 1 x 1 plates on before each wooden slat. They lift it and leave the thin gaps that make the backrest look slatted.
-
Plate 1 x 1 6× -
Tile 1 x 6 1× -
Plate 1 x 6 3×
-
-
Step 7 · 5 pieces
-
Brick 2 x 2 Round without Reinforcement 1× -
Dish 2 x 2 Inverted 1× -
Plate 1 x 1 Round 1× -
Brick 2 x 2 Round without Reinforcement 2×
-
-
Step 8 · 3 pieces
-
Plate 2 x 4 1× -
Brick 2 x 4 2×
-
-
Step 9 · 4 pieces
-
Plant Flower 2 x 2 Leaves 2× -
Plate 1 x 1 with 5 Petals 2×
-
-
Step 10 · 13 pieces
-
Plate 1 x 1 Round 8× -
Brick 2 x 4 3× -
Brick 2 x 2 2×
-
-
Step 11 · 12 pieces
Tip The trans-yellow round brick is the lamp. Keep a black round plate directly above and below it, then finish with the cone.
-
Brick 1 x 1 x 5 with Solid Stud 2× -
Brick 1 x 1 Round with Hollow Stud 2× -
Cone 1 x 1 2× -
Plate 1 x 1 Round 4× -
Brick 1 x 1 Round with Hollow Stud 2×
-
-
Step 12 · 14 pieces
-
Plant Flower 2 x 2 Leaves 2× -
Plate 1 x 1 Round 2× -
Plate 1 x 1 Round 4× -
Plate 1 x 1 with 5 Petals 2× -
Plate 1 x 1 Round 2× -
Plate 1 x 1 Round 2×
-
-
Step 13 · 6 pieces
-
Plate 1 x 1 Round 2× -
Plate 1 x 1 Round 2× -
Plate 1 x 1 Round 2×
-
About this build
Few pieces of street furniture are as familiar as the slatted park bench: wooden boards bolted between two cast-iron end frames, usually with a bin on one side and something green on the other. This build keeps to that recipe and scales it up, so the bench is the hero and everything else frames it.
The iron ends are the part that makes it read as a park bench rather than a garden seat. Each one is a black 1 x 4 x 2 arch turned front to back, so you see the curved leg from the side, topped by a smaller 1 x 3 arch that forms the armrest. Between them, reddish-brown plates carry three smooth medium-nougat seat tiles. The backrest is three wooden plates stacked on tiny black 1 x 1 spacers, which leaves thin gaps between the slats just like the real thing.
Around the bench sits a light grey paved patch, 14 by 8 studs, ringed by a darker curb tile and joined to the front of the grass by a short path. On the left stands a round dark-green trash bin with a black lid; on the right, a stone planter holds two leafy plants with red flowers. Two black lamp posts and a low hedge close off the back.
At a glance
- 104 parts in 13 steps on a 16 x 16 baseplate
- Beginner level; about 30–45 minutes for most builders
- Tricky bits: the paving gaps in step 2 and the backrest stack in step 6
For a variation, swap the medium-nougat slats for dark green ones, a common color for city benches, or move the bin to the other end and the planter beside the path.
Parts list
How to read these instructionsEvery piece is a standard LEGO® element, listed with its LDraw part number and color.
| Part | Name / ID | Color | Qty |
|---|---|---|---|
| Brick 1 x 1 x 5 with Solid Stud2453b | Black | 2 | |
| Plate 1 x 13024 | Black | 6 | |
| Brick 1 x 1 Round with Hollow Stud3062b | Black | 2 | |
| Brick 2 x 2 Round without Reinforcement3941 | Black | 1 | |
| Arch 1 x 34490 | Black | 2 | |
| Cone 1 x 14589 | Black | 2 | |
| Dish 2 x 2 Inverted4740 | Black | 1 | |
| Plate 1 x 1 Round6141 | Black | 5 | |
| Arch 1 x 4 x 26182 | Black | 2 | |
| Tile 1 x 363864 | Black | 2 | |
| Baseplate 16 x 163867 | Green | 1 | |
| Plant Flower 2 x 2 Leaves4727 | Green | 4 | |
| Plate 1 x 1 with 5 Petals24866 | Red | 2 | |
| Plate 1 x 1 Round6141 | Red | 4 | |
| Plate 1 x 1 Round6141 | Bright Green | 14 | |
| Plate 1 x 1 with 5 Petals24866 | Yellow | 2 | |
| Plate 1 x 1 Round6141 | Yellow | 4 | |
| Plate 1 x 1 Round6141 | White | 2 | |
| Brick 1 x 1 Round with Hollow Stud3062b | Trans Yellow | 2 | |
| Plate 2 x 43020 | Reddish Brown | 1 | |
| Plate 1 x 63666 | Reddish Brown | 4 | |
| Tile 1 x 66636 | Reddish Brown | 1 | |
| Tile 1 x 4 with Groove2431 | Light Bluish Grey | 2 | |
| Tile 2 x 2 with Groove3068b | Light Bluish Grey | 12 | |
| Tile 1 x 2 with Groove3069b | Light Bluish Grey | 3 | |
| Brick 2 x 43001 | Dark Bluish Grey | 2 | |
| Tile 1 x 84162 | Dark Bluish Grey | 1 | |
| Tile 1 x 66636 | Dark Bluish Grey | 5 | |
| Tile 1 x 4 with Groove2431 | Medium Nougat | 3 | |
| Plate 1 x 63666 | Medium Nougat | 3 | |
| Brick 2 x 43001 | Dark Green | 3 | |
| Brick 2 x 23003 | Dark Green | 2 | |
| Brick 2 x 2 Round without Reinforcement3941 | Dark Green | 2 | |
| Total pieces | 104 | ||