All models

Owl: Step-by-step building instructions

A brown owl with big round yellow eyes, ear tufts, a white speckled chest and folded wings, perched on a branch over a fallen log with ferns, leaves and toadstools.

134 parts 13 steps Beginner

Owl assembled model

Loading 3D model Check your connection and try again.

Drag to rotate. Pinch or scroll to zoom.

Build steps

Finished model

Drag to look around, then build it in 13 steps.

Step 1 of 13

  1. Step 1 · 7 pieces

    • Plate 1 x 1 Bright Green 3024 1×
    • Plate 1 x 1 Round Bright Green 6141 1×
    • Plate 1 x 2 Orange 3023b 2×
    • Plate 1 x 1 Round Orange 6141 1×
    • Plate 1 x 1 Round Bright Light Orange 6141 1×
    • Baseplate 16 x 16 Dark Green 3867 1×

About this build

Owls are easy to recognize even from far away: a squat body with almost no neck, a flat face, two large forward-facing eyes and, on many species, a pair of feather tufts that look like ears. This build leans hard on those features and lets everything else stay simple.

The owl is a seven-stud-wide block of Reddish Brown bricks, three courses for the body and three for the head. Each eye is a small cross of yellow 1×1 bricks around a black round brick, which reads as a circle once you step back. An orange 45° slope between the pupils pokes one stud out of the face as the beak, and two dark brown slopes on the top corners lean outward as ear tufts. The folded wings are dark brown log bricks turned front to back, so their grooves look like layered feathers. On the chest, white bricks with two brown spots give a hint of speckled markings.

Underneath, the owl sits on a dark brown branch that rests on a Dark Tan log with Tan cut ends. The branch runs out past the log's left end, where a short twig holds a sprig of leaves. Ferns, scattered orange leaves and two red-capped toadstools fill the 16 × 16 forest-floor base.

At a glance

  • 134 parts in 13 steps
  • Owl: 7 × 4 studs, six courses tall
  • Base: 16 × 16 studs
  • Roughly 30–45 minutes for most builders

Most of the build is plain stacking. The steps that need care are 6, where the talons and tail hang below the seat plate, and 11, where the pupils and beak go in. Count stud positions on the face before you press anything down, so both eyes come out the same.

Step 1 of 13

Every piece is a standard LEGO® element, listed with its LDraw part number and color.

Parts list
PartName / IDColorQty
Brick 1 x 1 Round with Hollow Stud3062b Black 2
Plate 2 x 23022 Green 4
Plate 1 x 1 Round6141 Red 2
Plate 1 x 13024 Bright Green 1
Plant Flower 2 x 2 Leaves4727 Bright Green 4
Plate 1 x 1 Round6141 Bright Green 2
Brick 1 x 13005 Yellow 8
Brick 1 x 13005 White 6
Brick 1 x 1 Round with Hollow Stud3062b White 2
Brick 1 x 33622 White 1
Brick 1 x 13005 Tan 16
Plate 1 x 23023b Orange 3
Slope Brick 45 2 x 13040b Orange 1
Plate 1 x 1 Round6141 Orange 5
Brick 1 x 2 Log30136 Dark Tan 8
Brick 1 x 4 Log30137 Dark Tan 12
Brick 2 x 43001 Reddish Brown 3
Brick 2 x 33002 Reddish Brown 6
Brick 2 x 23003 Reddish Brown 3
Brick 1 x 23004 Reddish Brown 3
Brick 1 x 13005 Reddish Brown 10
Brick 1 x 43010 Reddish Brown 3
Plate 4 x 63032 Reddish Brown 1
Brick 1 x 33622 Reddish Brown 8
Plate 1 x 43710 Reddish Brown 1
Plate 1 x 1 Round6141 Bright Light Orange 1
Baseplate 16 x 163867 Dark Green 1
Brick 1 x 83008 Dark Brown 2
Brick 1 x 4 Log30137 Dark Brown 6
Slope Brick 45 2 x 13040b Dark Brown 2
Brick 1 x 1 Round with Hollow Stud3062b Dark Brown 2
Brick 1 x 33622 Dark Brown 2
Slope Brick 45 2 x 1 Inverted without Inner Stopper Ring3665a Dark Brown 3
Total pieces134