All models

Snowy Pine Tree: Step-by-step building instructions

A tall pine with four stepped branch tiers, snow on every tier's edge and tips, standing on a white snowy mound beside grey snow-capped rocks and a fallen log with animal tracks in the snow.

137 parts 18 steps Beginner

Snowy Pine Tree assembled model

Loading 3D model Check your connection and try again.

Drag to rotate. Pinch or scroll to zoom.

Build steps

Finished model

Drag to look around, then build it in 18 steps.

Step 1 of 18

  1. Step 1 · 5 pieces

    • Slope Brick Curved 2 x 2 x 0.667 White 15068 4×
    • Baseplate 16 x 16 White 3867 1×

About this build

A conifer standing alone in fresh snow is one of the most familiar winter shapes: a straight trunk, branches that shorten toward the top, and a white line wherever snow has settled. This build keeps to that outline and leaves out ornaments, so it reads as a tree in the woods rather than one in a living room.

The tree is four separate branch tiers, 10, 8, 6 and 4 studs wide, each a dark green plate wrapped in 45-degree slopes. A short reddish-brown trunk section lifts every tier off the one below, which leaves a dark gap between layers and gives the stepped look of a real pine. White tiles along the top row of each skirt and a round white plate on every corner stud stand in for snow lying on the branches. A green cone with a white tip finishes the crown.

At ground level, a mound of curved white slopes hides the base of the trunk. Two grey rocks wear snow caps, a fallen log of log bricks carries a broken branch stub, and a short line of pale round tiles crosses the snow like animal tracks.

At a glance

  • 16 × 16 stud baseplate, 137 parts, 18 steps
  • Roughly 17 cm tall to the tip of the crown
  • About 30–45 minutes for most builders

The tiers are repetitive, so the main care point is centring: every tier sits on a single round trunk brick, and the slopes only lock the outer rim of the first tier in step 10. For a darker forest, swap the white snow tiles for green ones and keep the snow on the ground.

Step 1 of 18

Every piece is a standard LEGO® element, listed with its LDraw part number and color.

Parts list
PartName / IDColorQty
Slope Brick Curved 2 x 2 x 0.66715068 White 16
Tile 1 x 4 with Groove2431 White 5
Plate 2 x 23022 White 3
Plate 1 x 23023b White 4
Plate 4 x 43031 White 2
Tile 1 x 2 with Groove3069b White 5
Plate 1 x 43710 White 2
Plate 2 x 63795 White 2
Baseplate 16 x 163867 White 1
Plate 8 x 841539 White 1
Cone 1 x 14589 White 1
Plate 1 x 1 Round6141 White 13
Tile 1 x 363864 White 8
Brick 1 x 2 Log30136 Reddish Brown 2
Brick 1 x 4 Log30137 Reddish Brown 2
Brick 1 x 1 Round with Hollow Stud3062b Reddish Brown 1
Brick 2 x 2 Round without Reinforcement3941 Reddish Brown 8
Brick 2 x 23003 Light Bluish Grey 1
Slope Brick 45 2 x 23039 Light Bluish Grey 1
Tile 1 x 1 Round with Groove98138 Light Bluish Grey 1
Brick 2 x 23003 Dark Bluish Grey 1
Slope Brick 45 2 x 23039 Dark Bluish Grey 1
Slope Brick 45 2 x 13040b Dark Bluish Grey 2
Tile 1 x 1 Round with Groove98138 Dark Bluish Grey 1
Tile 1 x 1 Round with Groove98138 Very Light Bluish Grey 4
Brick 2 x 62456 Dark Green 3
Brick 2 x 43001 Dark Green 2
Brick 2 x 23003 Dark Green 1
Plate 4 x 43031 Dark Green 1
Slope Brick 45 2 x 43037 Dark Green 4
Slope Brick 45 2 x 33038 Dark Green 8
Slope Brick 45 2 x 23039 Dark Green 4
Slope Brick 45 2 x 2 Double Convex3045 Dark Green 16
Plate 1 x 83460 Dark Green 2
Plate 1 x 63666 Dark Green 2
Plate 1 x 43710 Dark Green 2
Cone 2 x 2 x 2 with Hollow Stud Open3942c Dark Green 1
Plate 6 x 63958 Dark Green 1
Plate 8 x 841539 Dark Green 2
Total pieces137