Red Fox: Step-by-step building instructions
A sitting red fox with an orange coat, white chest and tail tip, black legs and tall pointed ears, its bushy tail curled round its paws on a mossy forest floor with a log and toadstools.
103 parts 14 steps Beginner
Loading 3D model Check your connection and try again.
Drag to rotate. Pinch or scroll to zoom.
Build steps
Finished model
Drag to look around, then build it in 14 steps.
Step 1 of 14
-
Step 1 · 13 pieces
-
Plate 2 x 4 2× -
Plate 1 x 1 Round 1× -
Plate 1 x 2 1× -
Plate 1 x 1 1× -
Plate 1 x 2 1× -
Plate 1 x 1 1× -
Plate 1 x 1 Round 2× -
Baseplate 16 x 16 1× -
Plate 1 x 2 1× -
Plate 1 x 1 1× -
Plate 1 x 1 Round 1×
-
-
Step 2 · 6 pieces
-
Brick 1 x 1 4× -
Brick 1 x 4 Log 2×
-
-
Step 3 · 12 pieces
Tip Offset the joints in this course: two short log bricks per row instead of one long one, so each sits across the joint below.
-
Plate 1 x 1 Round 1× -
Plate 1 x 1 Round 1× -
Plate 1 x 1 1× -
Brick 1 x 1 Round with Hollow Stud 1× -
Brick 1 x 1 4× -
Brick 1 x 2 Log 4×
-
-
Step 4 · 7 pieces
-
Brick 1 x 1 Round with Hollow Stud 2× -
Brick 2 x 4 2× -
Brick 1 x 1 2× -
Brick 1 x 4 1×
-
-
Step 5 · 7 pieces
-
Brick 1 x 1 Round with Hollow Stud 2× -
Brick 2 x 4 2× -
Brick 1 x 1 2× -
Brick 1 x 4 1×
-
-
Step 6 · 9 pieces
Tip The tail gets lower toward the tip: three bricks along the side, a plate under the front corner, and the white curved tip straight on the base.
-
Slope Brick Curved 2 x 2 x 0.667 1× -
Slope Brick Curved 2 x 2 x 0.667 4× -
Brick 2 x 2 3× -
Plate 2 x 2 1×
-
-
Step 7 · 4 pieces
Tip Turn the 2×4 slope so its slanted face points to the back. The haunches step back one row on each of the next two courses.
-
Brick 1 x 4 1× -
Brick 2 x 4 1× -
Brick 1 x 4 1× -
Slope Brick 45 2 x 4 1×
-
-
Step 8 · 4 pieces
-
Brick 1 x 4 1× -
Brick 1 x 4 2× -
Slope Brick 45 2 x 4 1×
-
-
Step 9 · 7 pieces
Tip The white 2×4 jaw plate runs front to back and hangs two studs past the chest. Press it down onto the white neck brick first.
-
Brick 1 x 4 1× -
Plate 2 x 4 1× -
Brick 1 x 4 1× -
Plate 2 x 2 1× -
Slope Brick 45 2 x 4 1× -
Plate 1 x 4 2×
-
-
Step 10 · 7 pieces
Tip The black nose plate goes on the very front row of the muzzle, with an orange plate behind it.
-
Plate 1 x 2 1× -
Brick 2 x 2 1× -
Brick 1 x 4 1× -
Brick 2 x 4 1× -
Brick 1 x 4 1× -
Plate 1 x 2 1× -
Plate 4 x 4 1×
-
-
Step 11 · 5 pieces
-
Brick 1 x 1 Round with Hollow Stud 2× -
Brick 2 x 4 1× -
Brick 1 x 2 1× -
Brick 1 x 4 1×
-
-
Step 12 · 6 pieces
-
Tile 1 x 4 with Groove 1× -
Brick 2 x 4 1× -
Brick 1 x 4 2× -
Tile 2 x 2 with Groove 2×
-
-
Step 13 · 4 pieces
Tip Turn each ear slope so its tall side is on the outside of the head. The black cone tips then sit on the outer studs.
-
Cone 1 x 1 2× -
Slope Brick 45 2 x 1 2×
-
-
Step 14 · 12 pieces
-
Plate 2 x 2 2× -
Plate 2 x 2 Round with Axlehole 1× -
Plate 1 x 1 Round 1× -
Plant Flower 2 x 2 Leaves 2× -
Brick 1 x 1 Round with Hollow Stud 1× -
Brick 2 x 2 Round without Reinforcement 1× -
Plate 1 x 1 Round 2× -
Slope Brick 45 2 x 2 1× -
Brick 2 x 2 1×
-
About this build
A red fox is easy to recognise even at a distance: a rust-orange coat, a white throat and chest, black lower legs and ear backs, and a long bushy tail that often ends in a white tip. When a fox sits, it tends to wrap that tail around its front paws, and that pose is the one this build captures.
The fox is built as a simple stack of bricks, four studs wide. Two black round 1×1 columns make the front legs, and three white 1×4 bricks run up the front as the chest. At the back, three 2×4 slopes step down at 45 degrees to give the sitting haunches their curve. The head sits on a ring of plates, with a white jaw plate that reaches two studs forward to carry the muzzle and its black nose. The ears are single slopes turned outward, each topped with a black cone, so they stand tall and pointed above the head.
The tail runs down the left side as a row of 2×2 bricks capped with curved slopes, then turns across the front and gets lower as it goes: a plate under the corner piece, and only a white curved slope at the tip.
Around the fox sits a mossy forest floor on a 16 × 16 base: a fallen log with tan cut ends, red toadstools, a grey rock, two ferns, and leaves in dark red, amber and brown.
At a glance
- 103 parts in 14 steps
- 16 × 16 stud footprint
- About 30–45 minutes for most builders
Step 9 needs the most care, because the head plates overhang the neck at the front. Check that the white jaw plate points forward before you press it down.
Parts list
How to read these instructionsEvery piece is a standard LEGO® element, listed with its LDraw part number and color.
| Part | Name / ID | Color | Qty |
|---|---|---|---|
| Plate 1 x 23023b | Black | 1 | |
| Brick 1 x 1 Round with Hollow Stud3062b | Black | 6 | |
| Cone 1 x 14589 | Black | 2 | |
| Plate 2 x 43020 | Green | 2 | |
| Plate 2 x 23022 | Green | 2 | |
| Plate 1 x 1 Round6141 | Green | 1 | |
| Plate 2 x 2 Round with Axlehole4032a | Red | 1 | |
| Plate 1 x 1 Round6141 | Red | 2 | |
| Plate 1 x 13024 | Bright Green | 1 | |
| Plant Flower 2 x 2 Leaves4727 | Bright Green | 2 | |
| Plate 1 x 1 Round6141 | Bright Green | 1 | |
| Slope Brick Curved 2 x 2 x 0.66715068 | White | 1 | |
| Brick 2 x 23003 | White | 1 | |
| Brick 1 x 43010 | White | 4 | |
| Plate 2 x 43020 | White | 1 | |
| Brick 1 x 1 Round with Hollow Stud3062b | White | 2 | |
| Brick 2 x 2 Round without Reinforcement3941 | White | 1 | |
| Plate 1 x 1 Round6141 | White | 2 | |
| Brick 1 x 13005 | Tan | 8 | |
| Slope Brick Curved 2 x 2 x 0.66715068 | Orange | 4 | |
| Tile 1 x 4 with Groove2431 | Orange | 1 | |
| Brick 2 x 43001 | Orange | 8 | |
| Brick 2 x 23003 | Orange | 3 | |
| Brick 1 x 23004 | Orange | 1 | |
| Brick 1 x 13005 | Orange | 4 | |
| Brick 1 x 43010 | Orange | 10 | |
| Plate 2 x 23022 | Orange | 2 | |
| Plate 1 x 23023b | Orange | 1 | |
| Plate 4 x 43031 | Orange | 1 | |
| Slope Brick 45 2 x 43037 | Orange | 3 | |
| Slope Brick 45 2 x 13040b | Orange | 2 | |
| Tile 2 x 2 with Groove3068b | Orange | 2 | |
| Plate 1 x 43710 | Orange | 2 | |
| Brick 1 x 2 Log30136 | Reddish Brown | 4 | |
| Brick 1 x 4 Log30137 | Reddish Brown | 2 | |
| Plate 1 x 23023b | Reddish Brown | 1 | |
| Plate 1 x 13024 | Reddish Brown | 1 | |
| Slope Brick 45 2 x 23039 | Light Bluish Grey | 1 | |
| Brick 2 x 23003 | Dark Bluish Grey | 1 | |
| Plate 1 x 23023b | Bright Light Orange | 1 | |
| Plate 1 x 13024 | Bright Light Orange | 1 | |
| Plate 1 x 1 Round6141 | Bright Light Orange | 2 | |
| Baseplate 16 x 163867 | Dark Green | 1 | |
| Plate 1 x 23023b | Dark Red | 1 | |
| Plate 1 x 13024 | Dark Red | 1 | |
| Plate 1 x 1 Round6141 | Dark Red | 1 | |
| Total pieces | 103 | ||