All models

Penguin: Step-by-step building instructions

An emperor penguin with a white belly, yellow-orange ear patches, short flippers and orange feet, standing with its grey chick on an ice floe edged with blue water.

147 parts 18 steps Beginner

Penguin assembled model

Loading 3D model Check your connection and try again.

Drag to rotate. Pinch or scroll to zoom.

Build steps

Finished model

Drag to look around, then build it in 18 steps.

Step 1 of 18

  1. Step 1 · 9 pieces

    • Baseplate 16 x 16 Blue 3867 1×
    • Tile 2 x 2 with Groove White 3068b 1×
    • Tile 1 x 2 with Groove White 3069b 1×
    • Tile 1 x 1 with Groove White 3070b 1×
    • Tile 1 x 4 with Groove Trans Light Blue 2431 1×
    • Tile 1 x 2 with Groove Trans Light Blue 3069b 3×
    • Plate 2 x 2 Light Aqua 3022 1×

About this build

Emperor penguins are the tallest penguins alive, and they are easy to tell apart from their smaller relatives. Look for the bright yellow-orange patches on either side of the neck, the pale-yellow wash across the upper breast and a long beak with a colored stripe along the lower half. Adults stand upright on the sea ice around Antarctica, and their chicks wear a soft grey down with a black-and-white face until they grow adult feathers.

The build keeps the bird simple and tall: a black column five studs wide, with a white belly made of 1×3 bricks stacked one on another down the front. A single course of Bright Light Yellow marks the breast. Above it, Bright Light Orange bricks wrap the corners of the neck and climb the sides of the head, so the ear patches show from the front, the side and the back. The beak is two slopes stacked together: an orange inverted slope for the lower half and a black slope on top.

The flippers are the part to watch. In step 10 a wider shoulder course reaches one stud past the body on both sides, and each flipper hangs from it as a short stack of 1×2 bricks ending in an inverted slope.

The base is a 16×16 blue plate for open water, with a light aqua ice layer and a white snow layer on top, each cut to a different outline so the floe edge looks broken. The grey chick stands at its parent's feet on the left.

At a glance

  • 147 parts in 18 steps
  • About 30–45 minutes for most builders
  • 16 × 16 stud footprint; the penguin is about 13 bricks tall

Step 1 of 18

Every piece is a standard LEGO® element, listed with its LDraw part number and color.

Parts list
PartName / IDColorQty
Slope Brick Curved 2 x 2 x 0.66715068 Black 1
Tile 1 x 4 with Groove2431 Black 1
Brick 2 x 43001 Black 7
Brick 2 x 33002 Black 2
Brick 1 x 23004 Black 23
Brick 1 x 13005 Black 23
Brick 1 x 63009 Black 2
Plate 2 x 33021 Black 2
Plate 1 x 13024 Black 2
Slope Brick 45 2 x 13040b Black 1
Tile 1 x 2 with Groove3069b Black 2
Tile 1 x 1 with Groove3070b Black 3
Brick 1 x 33622 Black 14
Plate 1 x 33623 Black 1
Slope Brick 45 2 x 1 Inverted without Inner Stopper Ring3665a Black 2
Tile 1 x 363864 Black 3
Baseplate 16 x 163867 Blue 1
Brick 1 x 23004 White 1
Plate 2 x 43020 White 2
Plate 1 x 13024 White 1
Plate 4 x 43031 White 1
Plate 4 x 63032 White 1
Slope Brick 45 2 x 23039 White 1
Tile 2 x 2 with Groove3068b White 2
Tile 1 x 2 with Groove3069b White 1
Tile 1 x 1 with Groove3070b White 4
Brick 1 x 33622 White 7
Plate 6 x 63958 White 1
Tile 1 x 1 Round with Groove98138 White 3
Plate 1 x 23023b Orange 2
Slope Brick 45 2 x 1 Inverted without Inner Stopper Ring3665a Orange 1
Tile 1 x 4 with Groove2431 Trans Light Blue 1
Tile 1 x 2 with Groove3069b Trans Light Blue 3
Brick 2 x 23003 Light Bluish Grey 2
Tile 1 x 2 with Groove3069b Very Light Bluish Grey 2
Brick 1 x 13005 Bright Light Orange 10
Tile 1 x 2 with Groove3069b Bright Light Orange 2
Brick 1 x 33622 Bright Light Yellow 1
Brick 2 x 23003 Light Aqua 1
Brick 1 x 13005 Light Aqua 1
Plate 2 x 23022 Light Aqua 1
Plate 1 x 23023b Light Aqua 1
Plate 4 x 43031 Light Aqua 1
Plate 4 x 83035 Light Aqua 1
Plate 6 x 63958 Light Aqua 1
Plate 8 x 841539 Light Aqua 1
Total pieces147