All models

Watchtower

A medieval stone watchtower on a rocky hill, with arrow slits, a banded plank door flanked by torches, a corbelled crenellated top, a red and yellow banner, stone steps, a dirt path and a broken wall.

207 parts 16 steps Intermediate

Watchtower assembled model

Loading 3D model Check your connection and try again.

Drag to rotate. Pinch or scroll to zoom.

Build steps

Step 1 of 16

  1. Step 1 · 7 pieces

    • Plate 8 x 8 Green 41539 4×
    • Tile 2 x 2 with Groove Dark Tan 3068b 2×
    • Tile 1 x 1 with Groove Dark Tan 3070b 1×

About this build

From a distance, a castle tower is recognized by its top: the parapet bulges outward over the wall below, and its edge is broken into solid merlons with gaps between them. This model gets that profile with ten dark gray inverted slopes in step 11, set in a ring around the 6 x 6 shaft with their slopes facing out. An 8 x 8 plate rests on them, overhanging one stud on every side, and the parapet and merlons are built out to the edge of that plate.

Below the top, the shaft is all texture. Nearly every wall brick is a 1 x 2 or 1 x 4 brick with embossed stonework on its face, mostly light gray with a few dark gray ones scattered through the courses so the wall looks patched and weathered. Courses mix lengths, so the vertical joints never line up from one course to the next.

The openings are simple subtractions. Black 1 x 1 bricks stacked two courses high read as arrow slits; a slightly wider black stack higher up becomes the watch window. The door is two reddish-brown grille bricks, whose horizontal ribs look like bound planks, and a dark gray string course just above it carries a torch on each side.

Eleven wall courses make the shaft the most repetitive part of the build: steps 4 to 10 are mostly the same ring of bricks with the openings moving. Lay out each step's parts by color before starting, and you will spot a misplaced black brick quickly.

With 207 parts in 16 steps, expect around 50-75 minutes. The rock hill, stone steps, broken wall and banner fill a 16 x 16 stud base.

Parts list
PartName / IDColorQty
Brick 1 x 23004 Black 2
Brick 1 x 13005 Black 16
Plate 1 x 23023b Black 2
Plate 1 x 1 Round6141 Black 2
Plate 8 x 841539 Green 4
Plant Flower 2 x 2 Leaves4727 Green 1
Panel 1 x 2 x 2 Reinforced87552 Red 1
Plate 1 x 13024 Bright Green 1
Plate 1 x 1 Round6141 Bright Green 1
Plate 1 x 33623 Yellow 1
Plant Flower 2 x 2 with Solid Stud98262 Yellow 1
Tile 2 x 2 with Groove3068b Dark Tan 2
Tile 1 x 1 with Groove3070b Dark Tan 1
Cone 1 x 14589 Trans Orange 2
Brick 1 x 2 with Grille2877 Reddish Brown 2
Plate 1 x 23023b Reddish Brown 1
Brick 1 x 1 Round with Hollow Stud3062b Reddish Brown 2
Tile 2 x 2 with Groove3068b Reddish Brown 1
Brick 1 x 4 with Embossed Bricks15533 Light Bluish Grey 29
Brick 2 x 2 Corner2357 Light Bluish Grey 8
Brick 1 x 23004 Light Bluish Grey 1
Brick 1 x 13005 Light Bluish Grey 21
Plate 1 x 23023b Light Bluish Grey 1
Slope Brick 45 2 x 33038 Light Bluish Grey 2
Slope Brick 45 2 x 13040b Light Bluish Grey 1
Tile 1 x 2 with Groove3069b Light Bluish Grey 1
Brick 1 x 2 with Embossed Bricks98283 Light Bluish Grey 41
Brick 1 x 4 with Embossed Bricks15533 Dark Bluish Grey 3
Brick 1 x 13005 Dark Bluish Grey 2
Brick 2 x 83007 Dark Bluish Grey 4
Plate 1 x 23023b Dark Bluish Grey 2
Slope Brick 45 2 x 43037 Dark Bluish Grey 8
Slope Brick 45 2 x 33038 Dark Bluish Grey 6
Slope Brick 45 2 x 23039 Dark Bluish Grey 3
Slope Brick 45 2 x 2 Double Convex3045 Dark Bluish Grey 4
~Moved to 3660a3660 Dark Bluish Grey 10
Plate 1 x 63666 Dark Bluish Grey 1
Plate 1 x 43710 Dark Bluish Grey 3
Plate 8 x 841539 Dark Bluish Grey 1
Brick 1 x 2 with Embossed Bricks98283 Dark Bluish Grey 7
Plant Flower 2 x 2 Leaves4727 Dark Green 2
Cone 1 x 14589 Pearl Gold 1
Brick 1 x 1 x 5 with Solid Stud2453b Dark Brown 1
Brick 1 x 1 Round with Hollow Stud3062b Dark Brown 1
Total pieces207