Christmas Wreath: Step-by-step building instructions
An upright Christmas door wreath on a small wooden stand, with layered green leaves, red berries, gold baubles, pine cones and a big red bow at the bottom.
105 parts 14 steps Beginner
Loading 3D model Check your connection and try again.
Drag to rotate. Pinch or scroll to zoom.
Build steps
Finished model
Drag to look around, then build it in 14 steps.
Step 1 of 14
-
Step 1 · 5 pieces
-
Tile 1 x 4 with Groove 4× -
Plate 6 x 8 1×
-
-
Step 2 · 6 pieces
Tip The two 2 x 4 bricks sit side by side in the middle of the stand. Turn the 2 x 2 slopes so they run down toward the left and right edges like feet.
-
Brick 2 x 4 2× -
Slope Brick 45 2 x 2 4×
-
-
Step 3 · 4 pieces
-
Brick 1 x 1 2× -
Brick 1 x 6 2×
-
-
Step 4 · 5 pieces
Tip This row is wider than the one below. Place the long middle bricks first, then the short ends; each end brick must reach back onto a stud of row 1.
-
Brick 1 x 4 1× -
Brick 1 x 6 1× -
Brick 1 x 6 2× -
Brick 1 x 4 1×
-
-
Step 5 · 12 pieces
-
Brick 1 x 2 2× -
Slope Brick 45 2 x 1 1× -
Brick 1 x 2 2× -
Brick 1 x 1 2× -
Brick 1 x 4 2× -
Brick 1 x 1 Round with Hollow Stud 1× -
Brick 1 x 2 1× -
Tile 1 x 2 with Groove 1×
-
-
Step 6 · 11 pieces
Tip The inverted slopes at both outer ends lean outward, with their narrow bottom on the row below. The bow's sloped tops point away from the knot.
-
Slope Brick 45 2 x 2 1× -
Slope Brick 45 2 x 1 2× -
Brick 1 x 1 Round with Hollow Stud 2× -
Brick 1 x 2 2× -
Slope Brick 45 2 x 1 Inverted without Inner Stopper Ring 4×
-
-
Step 7 · 5 pieces
-
Brick 1 x 2 1× -
Brick 1 x 1 Round with Hollow Stud 1× -
Brick 1 x 3 3×
-
-
Step 8 · 8 pieces
-
Slope Brick 45 2 x 1 1× -
Slope Brick 45 2 x 1 1× -
Brick 1 x 1 2× -
Brick 1 x 3 2× -
Brick 1 x 1 Round with Hollow Stud 2×
-
-
Step 9 · 8 pieces
Tip Each pine cone is two reddish brown round bricks stacked on top of each other. Line them up with the first round brick placed in row 6.
-
Brick 1 x 1 Round with Hollow Stud 1× -
Slope Brick 45 2 x 1 1× -
Brick 1 x 1 Round with Hollow Stud 2× -
Brick 1 x 1 1× -
Brick 1 x 3 2× -
Brick 1 x 1 Round with Hollow Stud 1×
-
-
Step 10 · 7 pieces
-
Slope Brick 45 2 x 2 1× -
Brick 1 x 1 Round with Hollow Stud 1× -
Brick 1 x 1 Round with Hollow Stud 2× -
Brick 1 x 1 1× -
Brick 1 x 3 2×
-
-
Step 11 · 8 pieces
-
Slope Brick 45 2 x 2 1× -
Brick 1 x 2 3× -
Slope Brick 45 2 x 1 4×
-
-
Step 12 · 8 pieces
-
Slope Brick 45 2 x 2 1× -
Brick 1 x 2 3× -
Slope Brick 45 2 x 1 4×
-
-
Step 13 · 9 pieces
Tip The top bar crosses the opening with nothing underneath. Start with the bricks that rest on the left and right sides, then fill in the middle.
-
Brick 1 x 4 1× -
Slope Brick 45 2 x 2 1× -
Plate 1 x 1 Round 1× -
Brick 1 x 6 1× -
Slope Brick 45 2 x 1 4× -
Plate 1 x 1 Round 1×
-
-
Step 14 · 9 pieces
-
Brick 1 x 1 Round with Hollow Stud 1× -
Plate 1 x 1 Round 2× -
Brick 1 x 2 1× -
Slope Brick 45 2 x 1 4× -
Brick 1 x 1 Round with Hollow Stud 1×
-
About this build
A ring of evergreen branches on the front door is one of the oldest Christmas decorations, and its round shape is easy to spot from across a street. This brick version stands upright on a small wooden stand, so it can sit on a shelf or a windowsill instead of hanging from a hook.
The ring is fourteen studs wide and twelve bricks tall, built from rows of dark green 1 × N bricks two studs deep. Each row steps in or out by a stud or two, and 45° slopes at the outer corners round off the shoulders and the lower curve, so the outline reads as a circle rather than a square frame. Bright green slopes jut one stud forward from the front face here and there; they catch the light differently from the dark green and give the greenery a layered, leafy look.
Most decorations are set into the front row of bricks: red round bricks for holly berries, pearl gold ones for baubles, and two stacked reddish brown round bricks for each pine cone. At the bottom, a forward layer of red bricks forms the bow, with sloped loop tops and a dark red knot.
At a glance
- 105 parts, 14 steps
- Ring 14 studs wide and 12 bricks tall, stand 8 × 6 studs
- Colors: dark green, green, red, pearl gold, reddish brown, white
Most builders will need about 30–45 minutes. The rows are simple, but count studs carefully in steps 4, 11 and 13: these rows reach past the row below, and every brick has to land on at least one stud. For a quieter look, swap the gold baubles for more red berries.
Parts list
How to read these instructionsEvery piece is a standard LEGO® element, listed with its LDraw part number and color.
| Part | Name / ID | Color | Qty |
|---|---|---|---|
| Brick 1 x 23004 | Green | 1 | |
| Brick 1 x 43010 | Green | 2 | |
| Slope Brick 45 2 x 23039 | Green | 3 | |
| Slope Brick 45 2 x 13040b | Green | 1 | |
| Brick 1 x 23004 | Red | 2 | |
| Brick 1 x 13005 | Red | 2 | |
| Brick 1 x 63009 | Red | 1 | |
| Slope Brick 45 2 x 13040b | Red | 2 | |
| Brick 1 x 1 Round with Hollow Stud3062b | Red | 6 | |
| Plate 1 x 1 Round6141 | Red | 3 | |
| Slope Brick 45 2 x 23039 | Bright Green | 2 | |
| Slope Brick 45 2 x 13040b | Bright Green | 3 | |
| Tile 1 x 4 with Groove2431 | White | 4 | |
| Brick 2 x 43001 | Reddish Brown | 2 | |
| Plate 6 x 83036 | Reddish Brown | 1 | |
| Slope Brick 45 2 x 23039 | Reddish Brown | 4 | |
| Brick 1 x 1 Round with Hollow Stud3062b | Reddish Brown | 4 | |
| Brick 1 x 23004 | Dark Green | 11 | |
| Brick 1 x 13005 | Dark Green | 6 | |
| Brick 1 x 63009 | Dark Green | 5 | |
| Brick 1 x 43010 | Dark Green | 3 | |
| Slope Brick 45 2 x 13040b | Dark Green | 16 | |
| Brick 1 x 33622 | Dark Green | 9 | |
| Slope Brick 45 2 x 1 Inverted without Inner Stopper Ring3665a | Dark Green | 4 | |
| Brick 1 x 1 Round with Hollow Stud3062b | Pearl Gold | 5 | |
| Plate 1 x 1 Round6141 | Pearl Gold | 1 | |
| Brick 1 x 23004 | Dark Red | 1 | |
| Tile 1 x 2 with Groove3069b | Dark Red | 1 | |
| Total pieces | 105 | ||