Reindeer: Step-by-step building instructions
A brown Christmas reindeer with tall branching antlers, a dark nose and a red harness hung with gold bells, standing on a snowy base beside a wrapped present and a small fir tree.
108 parts 15 steps Beginner
Loading 3D model Check your connection and try again.
Drag to rotate. Pinch or scroll to zoom.
Build steps
Finished model
Drag to look around, then build it in 15 steps.
Step 1 of 15
-
Step 1 · 9 pieces
-
Plate 2 x 4 1× -
Plate 2 x 2 1× -
Plate 1 x 2 1× -
Plate 1 x 4 1× -
Baseplate 16 x 16 1× -
Plate 1 x 1 Round 2× -
Tile 1 x 1 Round with Groove 2×
-
-
Step 2 · 8 pieces
Tip The four hooves sit seven studs apart along the base and three apart across it; check that spacing before you build the legs on top.
-
Brick 1 x 1 4× -
Plate 1 x 1 4×
-
-
Step 3 · 8 pieces
-
Brick 1 x 1 8×
-
-
Step 4 · 4 pieces
-
Brick 2 x 4 4×
-
-
Step 5 · 6 pieces
Tip Turn the red 1×4 brick crosswise so it runs right across the body. It is the girth strap and should show on both sides.
-
Brick 1 x 4 1× -
Brick 2 x 4 1× -
Brick 2 x 3 2× -
Brick 2 x 2 2×
-
-
Step 6 · 4 pieces
-
Slope Brick 45 2 x 2 1× -
Brick 2 x 6 2× -
Brick 2 x 4 1×
-
-
Step 7 · 15 pieces
Tip Press each gold round brick up into the underside of a red plate where it sticks out past the body, then add its round plate below.
-
Plate 1 x 6 3× -
Brick 1 x 1 Round with Hollow Stud 6× -
Plate 1 x 1 Round 6×
-
-
Step 8 · 5 pieces
Tip The black nose brick hangs under the front end of the head plate. Attach it to that plate before you set the plate on the muzzle.
-
Brick 1 x 2 1× -
Brick 2 x 2 1× -
Brick 2 x 4 1× -
Brick 2 x 2 1× -
Plate 2 x 4 1×
-
-
Step 9 · 6 pieces
Tip Face both ear slopes outward and down. Hang them under the tan crossbar, one on each side of the head.
-
Tile 1 x 1 Round with Groove 2× -
Plate 1 x 6 1× -
Brick 2 x 3 1× -
Slope Brick 45 2 x 1 2×
-
-
Step 10 · 6 pieces
-
Brick 1 x 1 Round with Hollow Stud 4× -
Plate 1 x 4 2×
-
-
Step 11 · 8 pieces
-
Brick 1 x 1 Round with Hollow Stud 6× -
Cone 1 x 1 2×
-
-
Step 12 · 8 pieces
Tip Each 1×2 plate bridges the tallest rear beam and an empty stud. The cone goes on the empty stud, so the antler forks.
-
Plate 1 x 2 2× -
Brick 1 x 1 Round with Hollow Stud 2× -
Cone 1 x 1 4×
-
-
Step 13 · 7 pieces
-
Brick 1 x 2 1× -
Plate 2 x 2 1× -
Plate 1 x 1 Round 1× -
Plate 2 x 2 with Groove with 1 Centre Stud 1× -
Brick 2 x 2 2× -
Plate 1 x 2 1×
-
-
Step 14 · 7 pieces
-
Brick 1 x 1 2× -
Plate 4 x 4 1× -
Slope Brick 45 2 x 2 4×
-
-
Step 15 · 7 pieces
-
Plate 1 x 1 2× -
Plate 2 x 2 with Groove with 1 Centre Stud 1× -
Plate 2 x 2 1× -
Slope Brick 45 2 x 2 2× -
Cone 1 x 1 1×
-
About this build
Reindeer are the deer of the far north, and the only deer species in which both males and females usually grow antlers. In winter stories they pull a sleigh across the sky, so this one is dressed for the job: a red harness, a row of gold bells and a present waiting by its hooves.
The build is a caricature in the best sense. The body is a plain brown block on four slim one-stud legs, and almost all the character goes on top: a pale ruff at the throat, a muzzle that pokes one stud forward with a black nose at its tip, and antlers in tan that rise higher than the rest of the animal. Each antler is a stack of round 1×1 bricks with plates that branch sideways and cones on the tips, so it forks twice before it ends.
The harness is three red plates. Two of them form the collar under the neck and one makes a band across the back. They stick out one stud on each side, and the gold bells hang under those overhangs: a round brick with a round plate below it. A red strap in the middle body course finishes the girth band.
At a glance
- 108 parts, 15 steps, on a 16 × 16 white base
- Head faces left; the present sits by the front hooves
- A small fir tree with a gold tip stands in the back corner
- About 30–45 minutes for most builders
Steps 2–6 are quick stacking. Slow down from step 7: the bells hang below the plates instead of sitting on top of them, and the nose in step 8 hangs under the head plate in the same way.
Parts list
How to read these instructionsEvery piece is a standard LEGO® element, listed with its LDraw part number and color.
| Part | Name / ID | Color | Qty |
|---|---|---|---|
| Brick 1 x 23004 | Black | 1 | |
| Tile 1 x 1 Round with Groove98138 | Black | 2 | |
| Brick 1 x 23004 | Red | 1 | |
| Brick 1 x 43010 | Red | 1 | |
| Plate 2 x 23022 | Red | 1 | |
| Plate 1 x 63666 | Red | 3 | |
| Plate 1 x 1 Round6141 | Red | 1 | |
| Plate 2 x 2 with Groove with 1 Centre Stud87580 | Red | 1 | |
| Brick 2 x 23003 | White | 1 | |
| Plate 2 x 43020 | White | 1 | |
| Plate 2 x 23022 | White | 1 | |
| Plate 1 x 23023b | White | 1 | |
| Plate 1 x 13024 | White | 2 | |
| Slope Brick 45 2 x 23039 | White | 1 | |
| Plate 1 x 43710 | White | 1 | |
| Baseplate 16 x 163867 | White | 1 | |
| Plate 1 x 1 Round6141 | White | 2 | |
| Plate 2 x 2 with Groove with 1 Centre Stud87580 | White | 1 | |
| Tile 1 x 1 Round with Groove98138 | White | 2 | |
| Plate 1 x 23023b | Tan | 2 | |
| Brick 1 x 1 Round with Hollow Stud3062b | Tan | 12 | |
| Plate 1 x 63666 | Tan | 1 | |
| Plate 1 x 43710 | Tan | 2 | |
| Cone 1 x 14589 | Tan | 6 | |
| Brick 2 x 62456 | Reddish Brown | 2 | |
| Brick 2 x 43001 | Reddish Brown | 7 | |
| Brick 2 x 33002 | Reddish Brown | 3 | |
| Brick 2 x 23003 | Reddish Brown | 3 | |
| Brick 1 x 13005 | Reddish Brown | 14 | |
| Plate 2 x 43020 | Reddish Brown | 1 | |
| Slope Brick 45 2 x 13040b | Reddish Brown | 2 | |
| Brick 2 x 23003 | Dark Green | 2 | |
| Plate 2 x 23022 | Dark Green | 1 | |
| Plate 4 x 43031 | Dark Green | 1 | |
| Slope Brick 45 2 x 23039 | Dark Green | 6 | |
| Plate 1 x 23023b | Pearl Gold | 1 | |
| Brick 1 x 1 Round with Hollow Stud3062b | Pearl Gold | 6 | |
| Cone 1 x 14589 | Pearl Gold | 1 | |
| Plate 1 x 1 Round6141 | Pearl Gold | 6 | |
| Plate 1 x 13024 | Dark Brown | 4 | |
| Total pieces | 108 | ||