Triceratops: Step-by-step building instructions
A standing triceratops with two long forward-pointing brow horns, a short nose horn, a grey beak and a broad rounded neck frill, on thick short legs with a tail sweeping down and to the side, among ferns and rocks.
121 parts 13 steps Intermediate
Loading 3D model Check your connection and try again.
Drag to rotate. Pinch or scroll to zoom.
Build steps
Finished model
Drag to look around, then build it in 13 steps.
Step 1 of 13
-
Step 1 · 9 pieces
-
Plate 8 x 8 2× -
Plate 16 x 16 with Underside Ribs 1× -
Slope Brick 45 2 x 2 2× -
Slope Brick 45 2 x 2 Double 1× -
Plate 2 x 2 3×
-
-
Step 2 · 16 pieces
-
Plant Flower 2 x 2 Leaves 2× -
Plate 1 x 1 Round 9× -
Plant Leaves 6 x 5 2× -
Plant Flower 2 x 2 Leaves 3×
-
-
Step 3 · 12 pieces
-
Tile 1 x 1 Round with Groove 8× -
Brick 2 x 2 Round without Reinforcement 4×
-
-
Step 4 · 4 pieces
-
Brick 2 x 3 2× -
Brick 2 x 2 2×
-
-
Step 5 · 8 pieces
-
Brick 2 x 6 2× -
Brick 2 x 4 4× -
Brick 1 x 4 2×
-
-
Step 6 · 9 pieces
Tip The four 1 x 8 neck beams sit side by side and reach four studs past the front legs. Press them down firmly over the shoulders; they carry the whole head.
-
Brick 2 x 6 1× -
Brick 2 x 4 2× -
Brick 1 x 8 4× -
Brick 1 x 3 2×
-
-
Step 7 · 8 pieces
Tip Each tail segment hangs under the one before it, a little further back and one stud toward the front. Point the two tan cheek teeth out to the sides.
-
Plate 1 x 1 with Tooth In-line 2× -
Brick 2 x 3 2× -
Brick 2 x 2 1× -
Brick 1 x 2 1× -
Slope Brick 45 2 x 2 2×
-
-
Step 8 · 8 pieces
Tip The grey beak is two slopes on top and two inverted slopes underneath, both facing forward. Hold them in place until the nose-horn plate locks them in step 10.
-
Brick 1 x 1 2× -
Brick 1 x 2 1× -
Brick 1 x 4 1× -
Slope Brick 45 2 x 1 2× -
Slope Brick 45 2 x 1 Inverted with Inner Stopper Ring 2×
-
-
Step 9 · 9 pieces
-
Brick 2 x 4 3× -
Brick 1 x 2 1× -
Slope Brick 45 2 x 4 4× -
Slope Brick 45 2 x 2 1×
-
-
Step 10 · 8 pieces
-
Cone 1 x 1 1× -
Slope Brick Curved 2 x 2 x 0.667 5× -
Tile 2 x 2 with Groove 1× -
Plate 2 x 2 with Groove with 1 Centre Stud 1×
-
-
Step 11 · 12 pieces
Tip Set each brow horn on the black eye brick with its point facing forward, past the beak. The horns are the most visible part of the model, so check they are level.
-
Slope Brick 18 4 x 1 2× -
Tile 1 x 4 with Groove 4× -
Tile 1 x 2 with Groove 4× -
Tile 1 x 1 with Groove 2×
-
-
Step 12 · 11 pieces
Tip The frill stands on the neck beams right behind the face. The light rim pieces go at both ends of every row so the edge stays one color.
-
Brick 1 x 2 2× -
Slope Brick 45 2 x 1 2× -
Brick 1 x 3 2× -
Brick 1 x 8 1× -
Brick 1 x 6 3× -
Tile 1 x 6 1×
-
-
Step 13 · 7 pieces
Tip The 33-degree slopes and the two curved slopes round off the top of the frill. Put the small square tiles on the two exposed slope studs.
-
Slope Brick Curved 2 x 1 2× -
Tile 1 x 1 with Groove 2× -
Slope Brick 33 3 x 1 2× -
Brick 1 x 4 1×
-
About this build
Three horns and a bony shield: that is how most people spot a triceratops. This heavy plant eater lived in western North America at the very end of the Cretaceous period, and its skull alone, with two long brow horns, a short nose horn, a parrot-like beak and a broad frill, takes up a large share of its length.
The build leans on those features. The two brow horns are long tan 18-degree slopes that sit right above the black eyes and point straight ahead, past the grey beak. A tan cone on a centre-stud plate makes the shorter nose horn. Behind the head, the frill rises as one rounded shield, twelve studs wide and much wider than the body. It is dark orange with a lighter earth-orange rim: square ends at the bottom, then 45-degree slopes, 33-degree slopes and two curved slopes at the top give it a half-round outline.
The body is dark tan, with the head held low and forward and the hips as the highest point of the body, under a dome of curved slopes. The legs are only two bricks tall, and the tail steps down and out to the side in three short segments.
There are 121 parts in 13 steps on a 24 x 16 green base made from one 16 x 16 and two 8 x 8 plates, with ferns, rocks and pebbles around the animal. Most builders will need about 40 to 60 minutes.
Take care in step 6: the long neck beams reach four studs past the front legs and carry the whole head. In step 8, the beak is held only loosely until the nose-horn plate locks it in step 10.
Parts list
How to read these instructionsEvery piece is a standard LEGO® element, listed with its LDraw part number and color.
| Part | Name / ID | Color | Qty |
|---|---|---|---|
| Brick 1 x 13005 | Black | 2 | |
| Plate 8 x 841539 | Green | 2 | |
| Plant Flower 2 x 2 Leaves4727 | Green | 2 | |
| Plate 16 x 16 with Underside Ribs91405 | Green | 1 | |
| Cone 1 x 14589 | Tan | 1 | |
| Plate 1 x 1 with Tooth In-line49668 | Tan | 2 | |
| Slope Brick 18 4 x 160477 | Tan | 2 | |
| Tile 1 x 1 Round with Groove98138 | Tan | 8 | |
| Slope Brick Curved 2 x 2 x 0.66715068 | Dark Tan | 5 | |
| Tile 1 x 4 with Groove2431 | Dark Tan | 4 | |
| Brick 2 x 62456 | Dark Tan | 3 | |
| Brick 2 x 43001 | Dark Tan | 9 | |
| Brick 2 x 33002 | Dark Tan | 4 | |
| Brick 2 x 23003 | Dark Tan | 3 | |
| Brick 1 x 23004 | Dark Tan | 3 | |
| Brick 1 x 83008 | Dark Tan | 4 | |
| Brick 1 x 43010 | Dark Tan | 3 | |
| Slope Brick 45 2 x 43037 | Dark Tan | 4 | |
| Slope Brick 45 2 x 23039 | Dark Tan | 3 | |
| Tile 2 x 2 with Groove3068b | Dark Tan | 1 | |
| Tile 1 x 2 with Groove3069b | Dark Tan | 4 | |
| Tile 1 x 1 with Groove3070b | Dark Tan | 2 | |
| Brick 1 x 33622 | Dark Tan | 2 | |
| Brick 2 x 2 Round without Reinforcement3941 | Dark Tan | 4 | |
| Plate 2 x 2 with Groove with 1 Centre Stud87580 | Dark Tan | 1 | |
| Slope Brick 45 2 x 23039 | Light Bluish Grey | 2 | |
| Slope Brick 45 2 x 2 Double3043 | Light Bluish Grey | 1 | |
| Plate 1 x 1 Round6141 | Light Bluish Grey | 9 | |
| Plate 2 x 23022 | Dark Bluish Grey | 3 | |
| Slope Brick 45 2 x 13040b | Dark Bluish Grey | 2 | |
| Slope Brick 45 2 x 1 Inverted with Inner Stopper Ring3665b | Dark Bluish Grey | 2 | |
| Plant Leaves 6 x 52417 | Dark Green | 2 | |
| Plant Flower 2 x 2 Leaves4727 | Dark Green | 3 | |
| Slope Brick Curved 2 x 111477 | Earth Orange | 2 | |
| Brick 1 x 23004 | Earth Orange | 2 | |
| Slope Brick 45 2 x 13040b | Earth Orange | 2 | |
| Tile 1 x 1 with Groove3070b | Earth Orange | 2 | |
| Brick 1 x 33622 | Earth Orange | 2 | |
| Slope Brick 33 3 x 14286 | Earth Orange | 2 | |
| Brick 1 x 83008 | Dark Orange | 1 | |
| Brick 1 x 63009 | Dark Orange | 3 | |
| Brick 1 x 43010 | Dark Orange | 1 | |
| Tile 1 x 66636 | Dark Orange | 1 | |
| Total pieces | 121 | ||