Volcano Valley: Step-by-step building instructions
A prehistoric valley with a smoking volcano and orange lava running down its flanks, a blue lake, cycads and ferns, a long-necked Brachiosaurus by the water, a young Triceratops in the ferns and a Pteranodon on a sandstone cliff.
419 parts 37 steps Expert
Loading 3D model Check your connection and try again.
Drag to rotate. Pinch or scroll to zoom.
Build steps
Finished model
Drag to look around, then build it in 37 steps.
Step 1 of 37
-
Step 1 · 4 pieces
-
Baseplate 16 x 16 4×
-
-
Step 2 · 18 pieces
-
Tile 2 x 2 with Groove 1× -
Tile 1 x 2 with Groove 1× -
Tile 1 x 1 with Groove 6× -
Tile 2 x 4 3× -
Tile 2 x 2 with Groove 1× -
Tile 1 x 1 with Groove 4× -
Tile 1 x 6 1× -
Tile 2 x 4 1×
-
-
Step 3 · 17 pieces
-
Tile 1 x 4 with Groove 1× -
Tile 2 x 2 with Groove 3× -
Tile 1 x 1 with Groove 4× -
Tile 1 x 3 3× -
Tile 2 x 4 1× -
Tile 1 x 4 with Groove 1× -
Tile 2 x 2 with Groove 1× -
Tile 1 x 2 with Groove 1× -
Tile 1 x 1 with Groove 2×
-
-
Step 4 · 19 pieces
-
Tile 1 x 4 with Groove 1× -
Tile 1 x 2 with Groove 4× -
Tile 1 x 1 with Groove 10× -
Tile 1 x 6 1× -
Tile 1 x 1 with Groove 3×
-
-
Step 5 · 13 pieces
-
Tile 1 x 4 with Groove 1× -
Tile 1 x 2 with Groove 3× -
Tile 1 x 1 with Groove 5× -
Tile 1 x 3 2× -
Tile 1 x 1 with Groove 2×
-
-
Step 6 · 14 pieces
-
Tile 1 x 4 with Groove 1× -
Tile 1 x 1 with Groove 8× -
Tile 1 x 3 1× -
Tile 2 x 2 with Groove 1× -
Tile 1 x 2 with Groove 1× -
Tile 1 x 1 with Groove 1× -
Tile 1 x 3 1×
-
-
Step 7 · 11 pieces
-
Tile 1 x 2 with Groove 3× -
Tile 1 x 1 with Groove 4× -
Tile 1 x 3 1× -
Tile 2 x 2 with Groove 1× -
Tile 1 x 1 with Groove 2×
-
-
Step 8 · 19 pieces
-
Plate 1 x 1 3× -
Plate 1 x 1 13× -
Plate 1 x 3 1× -
Plate 1 x 4 2×
-
-
Step 9 · 17 pieces
Tip Start each slope ring with its four corner pieces, then fill the sides. The 33° slopes are three studs deep, so the next ring starts two studs further in.
-
Slope Brick 33 3 x 2 3× -
Slope Brick 33 3 x 4 8× -
Slope Brick 33 3 x 3 Double Convex 4× -
Slope Brick 33 3 x 3 2×
-
-
Step 10 · 11 pieces
Tip Keep the trans-orange bricks lined up with the orange slopes below them: the lava stripe must stay unbroken from the rim to the ground.
-
Brick 1 x 8 2× -
Brick 1 x 6 1× -
Brick 1 x 4 5× -
Brick 1 x 2 3×
-
-
Step 11 · 17 pieces
-
Slope Brick 45 2 x 2 3× -
Slope Brick 45 2 x 4 3× -
Slope Brick 45 2 x 3 5× -
Slope Brick 45 2 x 2 1× -
Slope Brick 45 2 x 1 1× -
Slope Brick 45 2 x 2 Double Convex 4×
-
-
Step 12 · 15 pieces
-
Slope Brick 45 2 x 2 3× -
Slope Brick 45 2 x 4 3× -
Slope Brick 45 2 x 2 5× -
Slope Brick 45 2 x 2 Double Convex 4×
-
-
Step 13 · 10 pieces
-
Brick 1 x 2 3× -
Brick 1 x 8 1× -
Brick 1 x 3 6×
-
-
Step 14 · 16 pieces
Tip The 75° slopes are three bricks tall. Check that each one faces outwards before pressing it down; a reversed slope still fits but breaks the cone.
-
Slope Brick 75 2 x 2 x 3 with Hollow Studs 3× -
Slope Brick 75 2 x 2 x 3 with Hollow Studs 5× -
Slope Brick 75 2 x 2 x 3 Double Convex 4× -
Slope Brick 75 2 x 1 x 3 with Hollow Stud 4×
-
-
Step 15 · 11 pieces
-
Slope Brick 75 2 x 2 x 3 with Hollow Studs 3× -
Slope Brick 75 2 x 2 x 3 with Hollow Studs 2× -
Slope Brick 75 2 x 2 x 3 Double Convex 4× -
Slope Brick 75 2 x 1 x 3 with Hollow Stud 2×
-
-
Step 16 · 6 pieces
-
Brick 1 x 2 2× -
Brick 1 x 6 1× -
Brick 1 x 2 3×
-
-
Step 17 · 7 pieces
Tip Lay the trans-orange 4 × 6 plate across the summit band first, then build the black rim on its outer studs so the middle eight studs stay open.
-
Brick 1 x 1 2× -
Brick 1 x 4 3× -
Brick 1 x 2 1× -
Plate 4 x 6 1×
-
-
Step 18 · 11 pieces
-
Brick 1 x 1 Round with Hollow Stud 1× -
Plate 1 x 1 Round 1× -
Brick 1 x 1 Round with Hollow Stud 2× -
Cone 1 x 1 3× -
Brick 1 x 1 Round with Hollow Stud 2× -
Brick 2 x 2 Round without Reinforcement 1× -
Cone 1 x 1 1×
-
-
Step 19 · 9 pieces
-
Cone 1 x 1 3× -
Plate 2 x 2 Round with Axlehole 1× -
Brick 2 x 2 Round without Reinforcement 1× -
Brick 1 x 1 Round with Hollow Stud 2× -
Brick 2 x 2 Round without Reinforcement 1× -
Brick 2 x 2 Round without Reinforcement 1×
-
-
Step 20 · 13 pieces
-
Brick 1 x 6 2× -
Brick 1 x 4 2× -
Brick 1 x 6 4× -
Brick 1 x 4 4× -
Plate 6 x 6 1×
-
-
Step 21 · 5 pieces
-
Slope Brick 45 2 x 2 2× -
Slope Brick 45 2 x 2 Double Convex 1× -
Slope Brick 45 2 x 2 1× -
Plant Flower 2 x 2 Leaves 1×
-
-
Step 22 · 13 pieces
-
Brick 1 x 2 2× -
Brick 1 x 4 2× -
Brick 1 x 2 4× -
Brick 1 x 4 4× -
Plate 4 x 4 1×
-
-
Step 23 · 7 pieces
Tip Both wings sit with their straight edges at the back. Press their inner ends onto the white body plate, then bridge them with the jumper plate.
-
Plate 1 x 1 with Tooth In-line 1× -
Plate 2 x 2 1× -
Brick 1 x 1 Round with Hollow Stud 1× -
Plate 1 x 2 with Groove with 1 Centre Stud 1× -
Plate 1 x 1 with Tooth In-line 1× -
Wing 2 x 4 Right without Chamfer 1× -
Wing 2 x 4 Left without Chamfer 1×
-
-
Step 24 · 6 pieces
-
Brick 1 x 1 x 3 4× -
Brick 1 x 1 2×
-
-
Step 25 · 9 pieces
-
Brick 2 x 3 2× -
Slope Brick 45 2 x 1 5× -
Plate 1 x 4 1× -
Slope Brick 31 1 x 1 x 0.667 1×
-
-
Step 26 · 14 pieces
Tip Each neck brick steps one stud towards the lake. The small 1 × 1 slopes go on the exposed stud behind every step to smooth the back of the neck.
-
Brick 1 x 2 7× -
Plate 1 x 1 1× -
Slope Brick 45 2 x 1 1× -
Plate 1 x 3 1× -
Slope Brick 31 1 x 1 x 0.667 4×
-
-
Step 27 · 5 pieces
-
Brick 2 x 4 1× -
Brick 1 x 1 4×
-
-
Step 28 · 9 pieces
-
Cone 1 x 1 2× -
Plate 1 x 1 with Tooth In-line 1× -
Brick 1 x 4 1× -
Brick 2 x 2 1× -
Plate 1 x 2 1× -
Slope Brick 45 2 x 2 1× -
Plate 1 x 2 with Groove with 1 Centre Stud 1× -
Panel 1 x 4 x 1 with Rounded Corners, Thick Wall 1×
-
-
Step 29 · 13 pieces
-
Plant Leaves 6 x 5 2× -
Brick 1 x 1 Round with Hollow Stud 6× -
Plant Leaves 6 x 5 1× -
Brick 1 x 1 Round with Hollow Stud 4×
-
-
Step 30 · 9 pieces
-
Plant Leaves 6 x 5 1× -
Brick 1 x 1 Round with Hollow Stud 3× -
Plant Leaves 6 x 5 1× -
Brick 1 x 1 Round with Hollow Stud 4×
-
-
Step 31 · 8 pieces
-
Plant Flower 2 x 2 Leaves 3× -
Plant Flower 2 x 2 Leaves 2× -
Plant Flower 2 x 2 Leaves 3×
-
-
Step 32 · 8 pieces
-
Plant Flower 2 x 2 Leaves 3× -
Plant Flower 2 x 2 Leaves 2× -
Plant Flower 2 x 2 Leaves 3×
-
-
Step 33 · 15 pieces
-
Brick 1 x 1 Round with Hollow Stud 10× -
Cone 1 x 1 5×
-
-
Step 34 · 15 pieces
-
Brick 1 x 1 Round with Hollow Stud 10× -
Cone 1 x 1 5×
-
-
Step 35 · 7 pieces
-
Plate 2 x 2 5× -
Rock 4 x 4 x 1.333 Top 1× -
Rock 4 x 4 x 1.333 Top 1×
-
-
Step 36 · 10 pieces
-
Plant Leaves 6 x 5 1× -
Plant Leaves 6 x 5 1× -
Brick 1 x 1 Round with Hollow Stud 4× -
Brick 1 x 1 Round with Hollow Stud 4×
-
-
Step 37 · 8 pieces
-
Plant Flower 2 x 2 Leaves 2× -
Plant Flower 2 x 2 Leaves 3× -
Plant Flower 2 x 2 Leaves 3×
-
About this build
A dark cone streaked with glowing rock dominates this valley, and everything else is arranged around it: a blue lake in the front corner, a sandstone cliff at the back, and ferns, cycads and horsetails, plants that were common long before flowers spread across the land.
The volcano covers an 18 × 16 stud footprint and is built from hollow slope rings, each one smaller than the last. Shallow 33° slopes form the wide base, 45° slopes the middle and tall 75° slopes the summit, so the outline curves inward like a real cone. Rock bands in black and dark brown break up the grey. The lava is a two-stud stripe of orange and red slopes, with trans-orange bricks in the bands, running from the crater rim down three faces and spreading out over the ground. Inside the crater a trans-orange plate glows under a small fountain of trans-yellow cones, while grey smoke drifts off to the back.
Three real animals share the scene. The Brachiosaurus has longer front legs than back legs, as its fossils show, so its back slopes down to the tail while its neck climbs in a staircase out over the water. A young Triceratops stands in the ferns with its frill and white horns facing you. On the cliff perches a Pteranodon, a flying reptile rather than a dinosaur, with its long beak and backswept red crest. In reality these animals lived millions of years apart; the diorama gathers them in one valley.
With 419 parts in 37 steps on four 16 × 16 baseplates, expect roughly three to four hours. The volcano rings in steps 9 to 17 are the longest stretch: count studs carefully, because each ring must sit exactly in line with the studs of the one below.
Parts list
How to read these instructionsEvery piece is a standard LEGO® element, listed with its LDraw part number and color.
| Part | Name / ID | Color | Qty |
|---|---|---|---|
| Brick 1 x 23004 | Black | 2 | |
| Brick 1 x 13005 | Black | 2 | |
| Brick 1 x 83008 | Black | 2 | |
| Brick 1 x 63009 | Black | 2 | |
| Brick 1 x 43010 | Black | 8 | |
| Plate 1 x 13024 | Black | 3 | |
| Cone 1 x 14589 | Black | 3 | |
| Tile 1 x 4 with Groove2431 | Blue | 1 | |
| Tile 2 x 2 with Groove3068b | Blue | 4 | |
| Tile 1 x 2 with Groove3069b | Blue | 1 | |
| Tile 1 x 1 with Groove3070b | Blue | 10 | |
| Tile 1 x 363864 | Blue | 3 | |
| Tile 2 x 487079 | Blue | 4 | |
| Plant Leaves 6 x 52417 | Green | 3 | |
| Brick 1 x 1 Round with Hollow Stud3062b | Green | 20 | |
| Baseplate 16 x 163867 | Green | 4 | |
| Plant Flower 2 x 2 Leaves4727 | Green | 8 | |
| Tile 1 x 4 with Groove2431 | Red | 1 | |
| Brick 1 x 23004 | Red | 1 | |
| Slope Brick 45 2 x 23039 | Red | 3 | |
| Tile 1 x 2 with Groove3069b | Red | 3 | |
| Tile 1 x 1 with Groove3070b | Red | 12 | |
| Slope Brick 75 2 x 2 x 3 with Hollow Studs3684a | Red | 3 | |
| Plate 1 x 1 with Tooth In-line49668 | Red | 1 | |
| Tile 1 x 363864 | Red | 2 | |
| Plant Leaves 6 x 52417 | Bright Green | 2 | |
| Plate 2 x 23022 | Bright Green | 5 | |
| Cone 1 x 14589 | Bright Green | 10 | |
| Plant Flower 2 x 2 Leaves4727 | Bright Green | 7 | |
| Plate 2 x 23022 | White | 1 | |
| Brick 1 x 1 Round with Hollow Stud3062b | White | 1 | |
| Plate 1 x 2 with Groove with 1 Centre Stud3794b | White | 1 | |
| Plate 2 x 2 Round with Axlehole4032a | White | 1 | |
| Cone 1 x 14589 | White | 2 | |
| Plate 1 x 1 with Tooth In-line49668 | White | 1 | |
| Tile 1 x 4 with Groove2431 | Tan | 2 | |
| Brick 1 x 23004 | Tan | 2 | |
| Brick 1 x 63009 | Tan | 2 | |
| Brick 1 x 43010 | Tan | 5 | |
| Tile 1 x 2 with Groove3069b | Tan | 7 | |
| Tile 1 x 1 with Groove3070b | Tan | 15 | |
| Plate 1 x 1 with Tooth In-line49668 | Tan | 1 | |
| Tile 1 x 363864 | Tan | 2 | |
| Tile 1 x 66636 | Tan | 1 | |
| Slope Brick 45 2 x 23039 | Orange | 3 | |
| Tile 2 x 2 with Groove3068b | Orange | 2 | |
| Tile 1 x 2 with Groove3069b | Orange | 1 | |
| Tile 1 x 1 with Groove3070b | Orange | 3 | |
| Slope Brick 33 3 x 23298 | Orange | 3 | |
| Slope Brick 75 2 x 2 x 3 with Hollow Studs3684a | Orange | 3 | |
| Tile 1 x 363864 | Orange | 1 | |
| Brick 2 x 43001 | Dark Tan | 1 | |
| Brick 2 x 23003 | Dark Tan | 1 | |
| Brick 1 x 23004 | Dark Tan | 4 | |
| Brick 1 x 13005 | Dark Tan | 4 | |
| Brick 1 x 63009 | Dark Tan | 4 | |
| Brick 1 x 43010 | Dark Tan | 8 | |
| Plate 1 x 23023b | Dark Tan | 1 | |
| Plate 4 x 43031 | Dark Tan | 1 | |
| Slope Brick 45 2 x 23039 | Dark Tan | 3 | |
| Slope Brick 45 2 x 2 Double Convex3045 | Dark Tan | 1 | |
| Plate 1 x 2 with Groove with 1 Centre Stud3794b | Dark Tan | 1 | |
| Plate 6 x 63958 | Dark Tan | 1 | |
| Brick 1 x 1 Round with Hollow Stud3062b | Trans Red | 1 | |
| Plate 1 x 1 Round6141 | Trans Red | 1 | |
| Brick 1 x 1 Round with Hollow Stud3062b | Trans Yellow | 2 | |
| Cone 1 x 14589 | Trans Yellow | 3 | |
| Brick 1 x 23004 | Trans Orange | 9 | |
| Plate 4 x 63032 | Trans Orange | 1 | |
| Brick 1 x 1 Round with Hollow Stud3062b | Trans Orange | 2 | |
| Brick 2 x 2 Round without Reinforcement3941 | Trans Orange | 1 | |
| Cone 1 x 14589 | Trans Orange | 1 | |
| Panel 1 x 4 x 1 with Rounded Corners, Thick Wall30413 | Reddish Brown | 1 | |
| Brick 1 x 1 Round with Hollow Stud3062b | Reddish Brown | 13 | |
| Wing 2 x 4 Right without Chamfer41769a | Reddish Brown | 1 | |
| Wing 2 x 4 Left without Chamfer41770a | Reddish Brown | 1 | |
| Brick 2 x 2 Round without Reinforcement3941 | Light Bluish Grey | 1 | |
| Rock 4 x 4 x 1.333 Top42284 | Light Bluish Grey | 1 | |
| Plate 1 x 13024 | Dark Bluish Grey | 13 | |
| Slope Brick 45 2 x 43037 | Dark Bluish Grey | 6 | |
| Slope Brick 45 2 x 33038 | Dark Bluish Grey | 5 | |
| Slope Brick 45 2 x 23039 | Dark Bluish Grey | 6 | |
| Slope Brick 45 2 x 13040b | Dark Bluish Grey | 1 | |
| Slope Brick 45 2 x 2 Double Convex3045 | Dark Bluish Grey | 8 | |
| Brick 1 x 1 Round with Hollow Stud3062b | Dark Bluish Grey | 2 | |
| Tile 1 x 1 with Groove3070b | Dark Bluish Grey | 5 | |
| Slope Brick 33 3 x 43297 | Dark Bluish Grey | 8 | |
| Plate 1 x 33623 | Dark Bluish Grey | 1 | |
| Slope Brick 33 3 x 3 Double Convex3675 | Dark Bluish Grey | 4 | |
| Slope Brick 75 2 x 2 x 3 with Hollow Studs3684a | Dark Bluish Grey | 7 | |
| Slope Brick 75 2 x 2 x 3 Double Convex3685 | Dark Bluish Grey | 8 | |
| Plate 1 x 43710 | Dark Bluish Grey | 2 | |
| Brick 2 x 2 Round without Reinforcement3941 | Dark Bluish Grey | 1 | |
| Slope Brick 33 3 x 34161 | Dark Bluish Grey | 2 | |
| Rock 4 x 4 x 1.333 Top42284 | Dark Bluish Grey | 1 | |
| Slope Brick 75 2 x 1 x 3 with Hollow Stud4460b | Dark Bluish Grey | 6 | |
| Brick 1 x 1 x 314716 | Medium Nougat | 4 | |
| Brick 2 x 33002 | Medium Nougat | 2 | |
| Brick 1 x 23004 | Medium Nougat | 7 | |
| Brick 1 x 13005 | Medium Nougat | 2 | |
| Plate 1 x 13024 | Medium Nougat | 1 | |
| Slope Brick 45 2 x 23039 | Medium Nougat | 1 | |
| Slope Brick 45 2 x 13040b | Medium Nougat | 6 | |
| Plate 1 x 33623 | Medium Nougat | 1 | |
| Plate 1 x 43710 | Medium Nougat | 1 | |
| Slope Brick 31 1 x 1 x 0.66754200 | Medium Nougat | 5 | |
| Brick 2 x 2 Round without Reinforcement3941 | Very Light Bluish Grey | 1 | |
| Tile 1 x 4 with Groove2431 | Dark Blue | 1 | |
| Tile 2 x 2 with Groove3068b | Dark Blue | 2 | |
| Tile 1 x 2 with Groove3069b | Dark Blue | 1 | |
| Tile 1 x 1 with Groove3070b | Dark Blue | 6 | |
| Tile 1 x 66636 | Dark Blue | 1 | |
| Tile 2 x 487079 | Dark Blue | 1 | |
| Plant Leaves 6 x 52417 | Dark Green | 2 | |
| Plant Flower 2 x 2 Leaves4727 | Dark Green | 10 | |
| Brick 1 x 83008 | Dark Brown | 1 | |
| Brick 1 x 1 Round with Hollow Stud3062b | Dark Brown | 12 | |
| Brick 1 x 33622 | Dark Brown | 6 | |
| Total pieces | 419 | ||