All models

Stonehenge: Step-by-step building instructions

A prehistoric stone circle on open grass, with a ring of grey uprights and lintels, the taller trilithon horseshoe, blue-grey bluestones, fallen stones and the heel stone by the avenue.

116 parts 12 steps Beginner

Stonehenge assembled model

Loading 3D model Check your connection and try again.

Drag to rotate. Pinch or scroll to zoom.

Build steps

Finished model

Drag to look around, then build it in 12 steps.

Step 1 of 12

  1. Step 1 · 6 pieces

    • Baseplate 16 x 16 Bright Green 3867 4×
    • Tile 2 x 4 Tan 87079 2×

About this build

On Salisbury Plain in southern England, a ring of huge grey sarsen stones still stands, many of them capped by flat lintels. Inside it sits a horseshoe of even larger trilithons, two uprights and a crosspiece each, with smaller bluestones set between the two rings. Part of the monument has fallen, which is as much a part of its outline today as the stones that remain upright.

This version keeps those layers apart through color. The outer ring is light bluish grey: fifteen uprights, each a stack of three 2 x 2 bricks, joined by 2 x 4 bricks that step around a circle about 22 studs across. The trilithons are dark bluish grey and climb from three bricks tall at the open front to five at the back, so the great trilithon rises above the lintel ring from every side. Sixteen sand-blue round bricks mark the bluestones, and a dark tan plate stands in for the altar stone.

At a glance

  • 116 parts in 12 steps on a 32 x 32 stud grass base
  • About 30–45 minutes for most builders (an estimate)
  • Only basic bricks, plates, tiles and a single slope, no hinges or clips

The ring is the part that needs attention. Each lintel spans the gap between two uprights and grips just one stud row on each side, so check every stack is exactly three bricks tall before step 9. The front left of the circle is left open on purpose: its missing upright lies in the grass in step 11 beside a dropped lintel.

Outside the ring, a tan avenue runs toward the heel stone, topped with a slope so it leans like a weathered block. For a fuller circle, stand the fallen pieces back up and close the gap.

Step 1 of 12

Every piece is a standard LEGO® element, listed with its LDraw part number and color.

Parts list
PartName / IDColorQty
Baseplate 16 x 163867 Bright Green 4
Tile 2 x 487079 Tan 2
Plate 2 x 43020 Dark Tan 1
Brick 2 x 62456 Light Bluish Grey 1
Brick 2 x 43001 Light Bluish Grey 15
Brick 2 x 23003 Light Bluish Grey 47
Brick 1 x 13005 Light Bluish Grey 2
Slope Brick 45 2 x 23039 Light Bluish Grey 1
Brick 2 x 43001 Dark Bluish Grey 5
Brick 1 x 23004 Dark Bluish Grey 6
Brick 1 x 2 x 2 without Understud3245c Dark Bluish Grey 16
Brick 1 x 1 Round with Hollow Stud3062b Sand Blue 16
Total pieces116