All models

Hot Air Balloon: Step-by-step building instructions

A tall hot air balloon with red, yellow and blue gores, black rope lines and a wicker basket with sandbags, floating over a grassy hill with a white fence.

229 parts 16 steps Intermediate

Hot Air Balloon assembled model

Loading 3D model Check your connection and try again.

Drag to rotate. Pinch or scroll to zoom.

Build steps

Finished model

Drag to look around, then build it in 16 steps.

Step 1 of 16

  1. Step 1 · 1 piece

    • Baseplate 16 x 16 Bright Green 3867 1×

About this build

A hot air balloon is easy to spot from far away: a huge rounded envelope sewn from vertical panels called gores, a narrow open mouth at the bottom, and a small wicker basket hanging on ropes below. Bright, contrasting gores are a common choice because they stand out against the sky.

In this build the envelope is stacked from ordinary red, yellow and blue bricks, eleven courses tall and about ten studs across at its widest. Each brick takes the colour of the gore it sits in, so the stripes run straight up the sides while the courses swell out and then close in again toward the crown. A black throat marks the mouth, and four tan ropes of stacked round bricks drop to the basket.

The basket is built from reddish-brown grille bricks, which give a woven look, with a dark brown rim. Eight tan sandbags hang under the rim on all four sides, and a small orange flame sits on a black burner in the middle. A column of clear bricks holds the whole craft above a two-tier grassy hill, so it seems to hover over the meadow, the white fence and the scattered flowers.

At a glance

  • 229 parts in 16 steps on a 16 x 16 base
  • About 45–75 minutes for most builders
  • The envelope (steps 12 to 16) holds more than half of the parts

The envelope is the part that needs attention: many bricks look alike, so check each colour against the stripe it belongs to before pressing it down. Step 12 also has a few small bricks at the edge that are held from above, so keep a finger under them until the courses above lock them in.

Step 1 of 16

Every piece is a standard LEGO® element, listed with its LDraw part number and color.

Parts list
PartName / IDColorQty
Brick 2 x 43001 Black 2
Brick 1 x 1 Round with Hollow Stud3062b Black 1
Plate 2 x 2 with Groove with 1 Centre Stud87580 Black 1
Brick 2 x 43001 Blue 2
Brick 2 x 33002 Blue 2
Brick 2 x 23003 Blue 2
Brick 1 x 23004 Blue 14
Brick 1 x 13005 Blue 14
Brick 2 x 83007 Blue 2
Brick 1 x 83008 Blue 3
Brick 1 x 63009 Blue 1
Brick 1 x 43010 Blue 3
Brick 1 x 33622 Blue 5
Brick 2 x 62456 Green 3
Brick 2 x 23003 Green 1
Slope Brick 45 2 x 43037 Green 2
Slope Brick 45 2 x 33038 Green 12
Slope Brick 45 2 x 23039 Green 2
Brick 2 x 62456 Red 4
Brick 2 x 43001 Red 1
Brick 2 x 23003 Red 1
Brick 1 x 23004 Red 18
Brick 1 x 13005 Red 10
Brick 2 x 83007 Red 6
Brick 1 x 63009 Red 1
Brick 1 x 33622 Red 2
Plate 1 x 1 Round6141 Red 4
Baseplate 16 x 163867 Bright Green 1
Brick 2 x 43001 Yellow 2
Brick 2 x 33002 Yellow 2
Brick 2 x 23003 Yellow 2
Brick 1 x 23004 Yellow 11
Brick 1 x 13005 Yellow 15
Brick 2 x 83007 Yellow 2
Brick 1 x 83008 Yellow 3
Brick 1 x 63009 Yellow 1
Brick 1 x 43010 Yellow 2
Brick 1 x 33622 Yellow 4
Plate 1 x 1 Round6141 Yellow 5
Fence Spindled 1 x 4 x 230055 White 6
Plate 1 x 1 Round6141 White 4
Brick 1 x 1 Round with Hollow Stud3062b Tan 28
Brick 2 x 23003 Trans Clear 4
Cone 1 x 14589 Trans Orange 1
Brick 1 x 2 with Grille2877 Reddish Brown 12
Plate 4 x 43031 Reddish Brown 1
Plate 2 x 23022 Dark Brown 2
Plate 2 x 63795 Dark Brown 2
Total pieces229