Sunflower: Step-by-step building instructions
A tall single sunflower in a terracotta pot, with a dark brown seed disc, two rings of yellow petals, a thick green stem, three broad leaves and a bee resting on a petal.
120 parts 14 steps Beginner
Loading 3D model Check your connection and try again.
Drag to rotate. Pinch or scroll to zoom.
Build steps
Finished model
Drag to look around, then build it in 14 steps.
Step 1 of 14
-
Step 1 · 10 pieces
-
Plate 1 x 1 Round 3× -
Plate 6 x 6 4× -
Tile 2 x 2 with Groove 3×
-
-
Step 2 · 6 pieces
-
Brick 2 x 2 1× -
Brick 1 x 6 2× -
Brick 1 x 4 2× -
Plate 6 x 6 1×
-
-
Step 3 · 10 pieces
Tip Swap the long and short pot bricks on each course so the corners overlap and the pot stays square.
-
Brick 2 x 2 2× -
Brick 1 x 6 4× -
Brick 1 x 4 4×
-
-
Step 4 · 8 pieces
-
Plate 1 x 1 Round 2× -
Plate 4 x 4 2× -
Brick 2 x 4 2× -
Brick 2 x 8 2×
-
-
Step 5 · 4 pieces
Tip The 4 × 6 leaf plate is held only by the stem bricks above and below it, so press the next stem brick down firmly.
-
Plate 2 x 4 1× -
Plate 4 x 6 1× -
Brick 2 x 2 Round without Reinforcement 2×
-
-
Step 6 · 4 pieces
-
Plate 2 x 4 1× -
Plate 4 x 6 1× -
Brick 2 x 2 Round without Reinforcement 2×
-
-
Step 7 · 4 pieces
-
Plate 2 x 4 1× -
Plate 4 x 6 1× -
Brick 2 x 2 Round without Reinforcement 2×
-
-
Step 8 · 3 pieces
-
Brick 2 x 2 Round without Reinforcement 3×
-
-
Step 9 · 12 pieces
Tip Start with the single yellow petal bricks at the bottom corners: they hang from the row above, so hold them until that row is on.
-
Brick 1 x 2 3× -
Brick 1 x 1 2× -
Brick 1 x 8 1× -
Brick 1 x 4 1× -
Brick 1 x 6 1× -
Brick 1 x 2 1× -
Brick 1 x 8 2× -
Brick 1 x 4 1×
-
-
Step 10 · 14 pieces
Tip The Dark Brown seed disc uses 2-deep bricks: line their back studs up with the petal row underneath so they bulge forward.
-
Brick 1 x 1 2× -
Brick 1 x 3 2× -
Brick 1 x 2 4× -
Brick 1 x 2 1× -
Brick 1 x 8 1× -
Brick 1 x 6 1× -
Brick 1 x 4 1× -
Brick 2 x 6 1× -
Brick 2 x 4 1×
-
-
Step 11 · 14 pieces
-
Brick 1 x 2 4× -
Brick 1 x 1 4× -
Brick 1 x 2 1× -
Brick 1 x 8 1× -
Brick 1 x 6 1× -
Brick 1 x 4 1× -
Brick 2 x 8 2×
-
-
Step 12 · 14 pieces
-
Brick 1 x 1 2× -
Brick 1 x 3 2× -
Brick 1 x 2 4× -
Brick 1 x 2 1× -
Brick 1 x 8 1× -
Brick 1 x 6 1× -
Brick 1 x 4 1× -
Brick 2 x 6 1× -
Brick 2 x 4 1×
-
-
Step 13 · 12 pieces
Tip Build the top petals symmetrically and count from the center stud; one stud off and the outline leans.
-
Brick 1 x 2 2× -
Brick 1 x 1 2× -
Brick 1 x 6 1× -
Brick 1 x 4 2× -
Brick 1 x 6 1× -
Brick 1 x 8 1× -
Brick 1 x 6 1× -
Brick 1 x 4 2×
-
-
Step 14 · 5 pieces
Tip Stack the bee's striped round plates on the left petal edge before adding the black head and the clear wing tile across both.
-
Brick 1 x 1 Round with Hollow Stud 1× -
Plate 1 x 1 Round 1× -
Plate 1 x 1 Round 2× -
Tile 1 x 2 with Groove 1×
-
About this build
Sunflowers are easy to spot in a summer garden: one big flat face on a tall, sturdy stem, a wide dark seed disc in the middle and a fringe of yellow petals around it. This build keeps those three shapes large and simple so the flower still reads from across the room.
The face stands upright and looks toward you. It is a pixel picture made from ordinary 1-wide bricks, twelve courses tall and fourteen studs across. The seed disc is Dark Brown and built from 2-deep bricks, so it bulges one stud forward from the petals, much like the domed center of a real bloom. Around it sits a ring of Bright Light Orange, and the outer Yellow petals end in single bricks that stick out at the top, bottom and sides to make the pointed tips. Behind the face, a Dark Green wall stands in for the green back of the flower head.
Below, a thick stem of round 2 × 2 bricks rises from a Dark Orange terracotta pot with a wider rim and dark soil. Three broad leaves are 4 × 6 plates clamped between stem bricks, each pointing a different way. A small bee with a striped yellow-and-black body and a clear wing rests on the left petals.
At a glance
- 120 parts in 14 steps
- 12 × 12 stud paving base, about 26 bricks tall
- Mostly basic bricks and plates, no sideways building
- Roughly 30–45 minutes for most builders
The tricky part is the face in steps 9 to 13: count studs carefully, because a brick shifted by one stud changes the outline. For a variation, swap the Bright Light Orange ring for Orange to make the two petal rings stand apart more.
Parts list
How to read these instructionsEvery piece is a standard LEGO® element, listed with its LDraw part number and color.
| Part | Name / ID | Color | Qty |
|---|---|---|---|
| Brick 1 x 1 Round with Hollow Stud3062b | Black | 1 | |
| Plate 1 x 1 Round6141 | Black | 1 | |
| Plate 2 x 43020 | Green | 3 | |
| Plate 4 x 63032 | Green | 3 | |
| Brick 2 x 2 Round without Reinforcement3941 | Green | 9 | |
| Plate 1 x 1 Round6141 | Bright Green | 3 | |
| Brick 1 x 23004 | Yellow | 9 | |
| Brick 1 x 13005 | Yellow | 8 | |
| Brick 1 x 83008 | Yellow | 1 | |
| Brick 1 x 63009 | Yellow | 1 | |
| Brick 1 x 43010 | Yellow | 3 | |
| Brick 1 x 33622 | Yellow | 4 | |
| Plate 1 x 1 Round6141 | Yellow | 2 | |
| Tile 1 x 2 with Groove3069b | Trans Clear | 1 | |
| Plate 1 x 1 Round6141 | Reddish Brown | 2 | |
| Plate 6 x 63958 | Light Bluish Grey | 4 | |
| Tile 2 x 2 with Groove3068b | Dark Bluish Grey | 3 | |
| Brick 1 x 23004 | Bright Light Orange | 8 | |
| Brick 1 x 13005 | Bright Light Orange | 4 | |
| Brick 1 x 63009 | Bright Light Orange | 2 | |
| Brick 1 x 23004 | Dark Green | 4 | |
| Brick 1 x 83008 | Dark Green | 6 | |
| Brick 1 x 63009 | Dark Green | 4 | |
| Brick 1 x 43010 | Dark Green | 6 | |
| Brick 2 x 62456 | Dark Brown | 2 | |
| Brick 2 x 43001 | Dark Brown | 2 | |
| Brick 2 x 23003 | Dark Brown | 3 | |
| Brick 2 x 83007 | Dark Brown | 2 | |
| Plate 4 x 43031 | Dark Brown | 2 | |
| Brick 2 x 43001 | Dark Orange | 2 | |
| Brick 2 x 83007 | Dark Orange | 2 | |
| Brick 1 x 63009 | Dark Orange | 6 | |
| Brick 1 x 43010 | Dark Orange | 6 | |
| Plate 6 x 63958 | Dark Orange | 1 | |
| Total pieces | 120 | ||