Succulent Pots: Step-by-step building instructions
Three potted succulents on a wooden shelf board, a pale rosette echeveria in a white pot, a spiky aloe in a terracotta pot and a round cactus with a pink flower in a teal bowl.
126 parts 13 steps Beginner
Loading 3D model Check your connection and try again.
Drag to rotate. Pinch or scroll to zoom.
Build steps
Finished model
Drag to look around, then build it in 13 steps.
Step 1 of 13
-
Step 1 · 8 pieces
-
Brick 2 x 4 8×
-
-
Step 2 · 7 pieces
Tip Lay the three 8 × 8 plates first, then bridge their seams with the four 6 × 8 plates turned lengthwise across the board.
-
Plate 6 x 8 4× -
Plate 8 x 8 3×
-
-
Step 3 · 20 pieces
Tip Leave a 4 × 4 patch of studs bare under each pot; the pot bases plug in there in the next step.
-
Tile 1 x 4 with Groove 4× -
Tile 1 x 8 12× -
Tile 2 x 4 4×
-
-
Step 4 · 9 pieces
-
Brick 2 x 4 2× -
Plate 4 x 4 1× -
Brick 2 x 4 2× -
Plate 4 x 4 1× -
Brick 2 x 4 2× -
Plate 4 x 4 1×
-
-
Step 5 · 4 pieces
-
Brick 2 x 4 2× -
Brick 2 x 4 2×
-
-
Step 6 · 3 pieces
Tip The 6 × 6 rim overhangs the pot body by one stud on every side. That overhang is the pot's lip, so centre it carefully.
-
Plate 6 x 6 1× -
Plate 6 x 6 1× -
Plate 6 x 6 1×
-
-
Step 7 · 15 pieces
-
Tile 1 x 4 with Groove 2× -
Tile 1 x 6 2× -
Tile 1 x 4 with Groove 2× -
Tile 1 x 6 2× -
Plate 4 x 4 3× -
Tile 1 x 4 with Groove 2× -
Tile 1 x 6 2×
-
-
Step 8 · 8 pieces
Tip Each slope turns a quarter further than the last. When done, the four high stud rows should meet around a 2 × 2 hole in the middle.
-
Slope Brick 45 2 x 2 4× -
Tile 1 x 1 Round with Groove 4×
-
-
Step 9 · 5 pieces
-
Slope Brick 31 1 x 1 x 0.667 4× -
Plate 2 x 2 1×
-
-
Step 10 · 14 pieces
Tip Build the tallest columns on one diagonal and the shorter ones on the other, so the aloe peaks in the centre.
-
Brick 1 x 1 Round with Hollow Stud 10× -
Cone 1 x 1 4×
-
-
Step 11 · 12 pieces
-
Brick 1 x 1 Round with Hollow Stud 4× -
Cone 1 x 1 8×
-
-
Step 12 · 10 pieces
-
Brick 2 x 2 2× -
Brick 1 x 2 8×
-
-
Step 13 · 11 pieces
Tip Point every small slope outward, away from the middle; the round 2 × 2 brick then sits in the centre and carries the flower.
-
Plant Flower 2 x 2 with Solid Stud 1× -
Plate 1 x 1 Round 1× -
Brick 2 x 2 Round without Reinforcement 1× -
Slope Brick 31 1 x 1 x 0.667 8×
-
About this build
Succulents store water in thick leaves or stems, which is why so many of them end up on sunny windowsills: they forgive a forgotten watering. They also come in very different shapes, and this shelf lines up three of the most familiar ones so the contrast does the work.
On the left, an echeveria grows as a flat rosette. Four 2 × 2 slopes in sand green are laid in a pinwheel, each one turned a quarter further than the last, and four bright green cheese slopes repeat the pattern at the centre. Round tiles cap the leaf tips so the rosette stays soft at the edges.
The aloe in the middle is the tall one: a cluster of round 1 × 1 bricks of different heights, each finished with a cone, so the spikes rise toward the centre like a real aloe's fleshy leaves. On the right, a barrel cactus sits low in a shallow teal bowl. Its body is a cross of bricks rounded off with small slopes, and a pink flower with a yellow centre crowns it, the one spot of bright color on the shelf.
Each pot has a 6 × 6 rim edged with tiles over a 4 × 4 body for a real lip, and dark brown soil fills the middle. The board is two layers of reddish brown plates tiled smooth, resting on two dark legs.
At a glance
- 126 parts in 13 steps
- Board 24 × 8 studs; the aloe stands about ten bricks tall
- Roughly 30–45 minutes for most builders
Step 8 is the one to watch: every rosette slope faces a different direction, and the studs must end up in a ring around the centre.
Parts list
How to read these instructionsEvery piece is a standard LEGO® element, listed with its LDraw part number and color.
| Part | Name / ID | Color | Qty |
|---|---|---|---|
| Brick 1 x 1 Round with Hollow Stud3062b | Green | 14 | |
| Cone 1 x 14589 | Green | 12 | |
| Tile 1 x 4 with Groove2431 | Dark Turquoise | 2 | |
| Brick 2 x 43001 | Dark Turquoise | 2 | |
| Plate 4 x 43031 | Dark Turquoise | 1 | |
| Plate 6 x 63958 | Dark Turquoise | 1 | |
| Tile 1 x 66636 | Dark Turquoise | 2 | |
| Plant Flower 2 x 2 with Solid Stud98262 | Dark Pink | 1 | |
| Slope Brick 31 1 x 1 x 0.66754200 | Bright Green | 4 | |
| Plate 1 x 1 Round6141 | Yellow | 1 | |
| Tile 1 x 4 with Groove2431 | White | 2 | |
| Brick 2 x 43001 | White | 4 | |
| Plate 4 x 43031 | White | 1 | |
| Plate 6 x 63958 | White | 1 | |
| Tile 1 x 66636 | White | 2 | |
| Tile 1 x 4 with Groove2431 | Reddish Brown | 4 | |
| Plate 6 x 83036 | Reddish Brown | 4 | |
| Plate 8 x 841539 | Reddish Brown | 3 | |
| Tile 1 x 84162 | Reddish Brown | 12 | |
| Tile 2 x 487079 | Reddish Brown | 4 | |
| Brick 2 x 23003 | Dark Green | 2 | |
| Brick 1 x 23004 | Dark Green | 8 | |
| Brick 2 x 2 Round without Reinforcement3941 | Dark Green | 1 | |
| Slope Brick 31 1 x 1 x 0.66754200 | Dark Green | 8 | |
| Brick 2 x 43001 | Dark Brown | 8 | |
| Plate 4 x 43031 | Dark Brown | 3 | |
| Plate 2 x 23022 | Sand Green | 1 | |
| Slope Brick 45 2 x 23039 | Sand Green | 4 | |
| Tile 1 x 1 Round with Groove98138 | Sand Green | 4 | |
| Tile 1 x 4 with Groove2431 | Dark Orange | 2 | |
| Brick 2 x 43001 | Dark Orange | 4 | |
| Plate 4 x 43031 | Dark Orange | 1 | |
| Plate 6 x 63958 | Dark Orange | 1 | |
| Tile 1 x 66636 | Dark Orange | 2 | |
| Total pieces | 126 | ||