All models

Gingerbread House: Step-by-step building instructions

A Christmas gingerbread house with cookie-brown walls, thick white icing on every corner and roof edge, a chocolate roof topped with gumdrops, candy cane posts by the door, a peppermint path and a snowy yard with a little tree.

177 parts 17 steps Intermediate

Gingerbread House assembled model

Loading 3D model Check your connection and try again.

Drag to rotate. Pinch or scroll to zoom.

Build steps

Finished model

Drag to look around, then build it in 17 steps.

Step 1 of 17

  1. Step 1 · 4 pieces

    Tip Center the three red round tiles on the middle two stud columns of the baseplate, with the first tile touching the front wall line.

    • Tile 2 x 2 Round with Round Underside Stud Red 14769 3×
    • Baseplate 16 x 16 White 3867 1×

About this build

Gingerbread houses are a holiday tradition in many homes: slabs of spiced cookie glued together with white royal icing, then covered in whatever candy is on hand. This brick version keeps the rules of the real thing. The walls are Medium Nougat, the warm brown of baked dough, and every seam a baker would pipe is white.

Look at the corners first. Each one is a white column of a 1 × 1 brick and a tall 1 × 1 × 5 post, so the walls seem held together by icing. A double band of white plates sits on top of the walls; the upper layer sticks out one stud at each gable, like icing squeezed out from under the roof. The roof is reddish-brown chocolate with a white eave course and white rake slopes on both ends, and the ridge is a white plate strip studded with red, green and yellow cone gumdrops.

Out front, a peppermint path of round red tiles leads to a red door in a white frame. Two striped candy canes stand beside it, built from alternating round bricks with a plate and two round plates hanging from it to make the hook. A two-tier tree of corner slopes, snow drifts and a few more gumdrops fill the white yard.

At a glance

  • 12 × 8 stud house on a 16 × 16 baseplate
  • 177 parts in 17 steps
  • About 45–60 minutes for most builders

Step 14 needs a light touch: the hanging round plates under each cane hook are held by a single stud. If you want a busier roof, swap a few chocolate slopes for white ones to look like snow.

Step 1 of 17

Every piece is a standard LEGO® element, listed with its LDraw part number and color.

Parts list
PartName / IDColorQty
Cone 1 x 14589 Green 6
Tile 2 x 2 Round with Round Underside Stud14769 Red 3
Plate 1 x 23023b Red 2
Brick 1 x 1 Round with Hollow Stud3062b Red 4
Cone 1 x 14589 Red 6
Door 1 x 4 x 6 with 4 Panes and Stud Handle60623 Red 1
Plate 1 x 1 Round6141 Red 2
Cone 1 x 14589 Yellow 6
Plate 1 x 1 Round6141 Yellow 1
Brick 1 x 1 x 5 with Solid Stud2453b White 4
Brick 1 x 13005 White 4
Plate 2 x 43020 White 1
Plate 2 x 83034 White 1
Plate 6 x 83036 White 4
Slope Brick 45 2 x 43037 White 6
Slope Brick 45 2 x 23039 White 2
Slope Brick 45 2 x 13040b White 18
Brick 1 x 1 Round with Hollow Stud3062b White 4
Plate 2 x 103832 White 1
Baseplate 16 x 163867 White 1
Window 1 x 2 x 2 without Sill60592 White 5
Door 1 x 4 x 6 Frame60596 White 1
Plate 1 x 1 Round6141 White 2
Brick 1 x 23004 Trans Yellow 2
Glass for Window 1 x 2 x 2 without Sill60601 Trans Yellow 5
Brick 2 x 23003 Reddish Brown 1
Slope Brick 45 2 x 43037 Reddish Brown 18
Brick 1 x 23004 Medium Nougat 16
Brick 1 x 13005 Medium Nougat 10
Brick 1 x 63009 Medium Nougat 10
Brick 1 x 43010 Medium Nougat 12
Brick 1 x 33622 Medium Nougat 6
Brick 2 x 23003 Dark Green 1
Plate 4 x 43031 Dark Green 2
Slope Brick 45 2 x 2 Double Convex3045 Dark Green 8
Cone 2 x 2 x 2 with Hollow Stud Open3942c Dark Green 1
Total pieces177