Chess Set: Step-by-step building instructions
A complete chess set in its opening position on an 8 by 8 board of black and white squares in a wooden frame, with domed pawns, castle rooks, horse-head knights, pointed bishops and gold-crowned queens and kings.
205 parts 15 steps Intermediate
Loading 3D model Check your connection and try again.
Drag to rotate. Pinch or scroll to zoom.
Build steps
Finished model
Drag to look around, then build it in 15 steps.
Step 1 of 15
-
Step 1 · 9 pieces
-
Plate 6 x 6 9×
-
-
Step 2 · 10 pieces
Tip The frame tiles lap over the seams between the six-by-six base plates, so press each one down firmly to lock the base together.
-
Tile 1 x 2 with Groove 2× -
Tile 1 x 8 8×
-
-
Step 3 · 16 pieces
Tip Check the colors before pressing down: the left-hand corner square on your side, a1, must be black, and colors alternate along every row.
-
Plate 2 x 2 with Groove with 1 Centre Stud 8× -
Plate 2 x 2 with Groove with 1 Centre Stud 8×
-
-
Step 4 · 32 pieces
-
Tile 2 x 2 with Groove 16× -
Tile 2 x 2 with Groove 16×
-
-
Step 5 · 16 pieces
-
Plate 2 x 2 with Groove with 1 Centre Stud 8× -
Plate 2 x 2 with Groove with 1 Centre Stud 8×
-
-
Step 6 · 24 pieces
Tip Each piece sits on the single centre stud of its jumper plate. Build all eight pawns as stacks first, then place them in one row.
-
Plate 1 x 1 Round with Swirled Top 8× -
Brick 1 x 1 Round with Hollow Stud 8× -
Plate 1 x 1 Round 8×
-
-
Step 7 · 8 pieces
-
Brick 1 x 1 Round with Hollow Stud 2× -
Brick 1 x 1 with Studs on Four Sides 2× -
Plate 1 x 1 Round 4×
-
-
Step 8 · 10 pieces
Tip Turn each knight's slope so the sloped face points toward the board's centre file, then set the tooth plate on top pointing the other way as the mane.
-
Slope Brick 45 2 x 1 2× -
Brick 1 x 1 Round with Hollow Stud 2× -
Plate 1 x 1 with Tooth In-line 2× -
Plate 1 x 1 Round 4×
-
-
Step 9 · 8 pieces
-
Brick 1 x 1 Round with Hollow Stud 4× -
Cone 1 x 1 2× -
Plate 1 x 1 Round 2×
-
-
Step 10 · 11 pieces
Tip Queen on her own color: the white queen goes on the white square next to the middle, and the king takes the black square beside her.
-
Brick 1 x 1 Round with Hollow Stud 6× -
Plate 1 x 1 Round 2× -
Plate 1 x 1 with 5 Petals 1× -
Plate 1 x 1 Round with Tabs 1× -
Cone 1 x 1 1×
-
-
Step 11 · 24 pieces
-
Plate 1 x 1 Round with Swirled Top 8× -
Brick 1 x 1 Round with Hollow Stud 8× -
Plate 1 x 1 Round 8×
-
-
Step 12 · 8 pieces
-
Brick 1 x 1 Round with Hollow Stud 2× -
Brick 1 x 1 with Studs on Four Sides 2× -
Plate 1 x 1 Round 4×
-
-
Step 13 · 10 pieces
-
Slope Brick 45 2 x 1 2× -
Brick 1 x 1 Round with Hollow Stud 2× -
Plate 1 x 1 with Tooth In-line 2× -
Plate 1 x 1 Round 4×
-
-
Step 14 · 8 pieces
-
Brick 1 x 1 Round with Hollow Stud 4× -
Cone 1 x 1 2× -
Plate 1 x 1 Round 2×
-
-
Step 15 · 11 pieces
Tip Mirror the white army: the black queen stands on the black square directly opposite the white queen, and the two kings face each other on the same file.
-
Brick 1 x 1 Round with Hollow Stud 6× -
Plate 1 x 1 Round 2× -
Plate 1 x 1 with 5 Petals 1× -
Plate 1 x 1 Round with Tabs 1× -
Cone 1 x 1 1×
-
About this build
Chess is played on a board of 64 squares in alternating light and dark colors, with each player starting from two full rows of pieces: eight pawns in front, and behind them rooks in the corners, then knights, bishops, and the queen and king in the middle. This set lays all 32 pieces out in that opening position, so it can sit on a shelf as a display or be played with.
Every square is 2 × 2 studs, which makes the board 16 studs across inside a one-stud wooden frame. Light squares are white and dark squares are black, and a dark square sits in each player's left-hand corner, just as on a real board. The four home ranks use jumper plates with a single centre stud, so each piece clicks exactly into the middle of its square; the four middle ranks are smooth tiles.
The pieces are built from one-stud parts and get taller with rank:
- Pawns: a round brick with a swirled cap.
- Rooks: a brick with studs on four sides for battlements.
- Knights: a 45° slope turned sideways as the horse head, with a tooth plate as the mane.
- Bishops: a cone for the pointed mitre.
- Queens and kings: pearl-gold crowns, and the king adds a gold cone on top.
All 205 parts go together in 15 steps; plan on roughly 45–60 minutes. The board itself is quick. The pieces are repetitive rather than hard, so building one army as a batch of identical stacks keeps it moving. Watch the queen in steps 10 and 15: she always starts on the square of her own color.
Parts list
How to read these instructionsEvery piece is a standard LEGO® element, listed with its LDraw part number and color.
| Part | Name / ID | Color | Qty |
|---|---|---|---|
| Plate 1 x 1 Round with Swirled Top15470 | Black | 8 | |
| Slope Brick 45 2 x 13040b | Black | 2 | |
| Brick 1 x 1 Round with Hollow Stud3062b | Black | 22 | |
| Tile 2 x 2 with Groove3068b | Black | 16 | |
| Cone 1 x 14589 | Black | 2 | |
| Brick 1 x 1 with Studs on Four Sides4733 | Black | 2 | |
| Plate 1 x 1 with Tooth In-line49668 | Black | 2 | |
| Plate 1 x 1 Round6141 | Black | 20 | |
| Plate 2 x 2 with Groove with 1 Centre Stud87580 | Black | 16 | |
| Plate 1 x 1 Round with Swirled Top15470 | White | 8 | |
| Slope Brick 45 2 x 13040b | White | 2 | |
| Brick 1 x 1 Round with Hollow Stud3062b | White | 22 | |
| Tile 2 x 2 with Groove3068b | White | 16 | |
| Cone 1 x 14589 | White | 2 | |
| Brick 1 x 1 with Studs on Four Sides4733 | White | 2 | |
| Plate 1 x 1 with Tooth In-line49668 | White | 2 | |
| Plate 1 x 1 Round6141 | White | 20 | |
| Plate 2 x 2 with Groove with 1 Centre Stud87580 | White | 16 | |
| Tile 1 x 2 with Groove3069b | Reddish Brown | 2 | |
| Tile 1 x 84162 | Reddish Brown | 8 | |
| Plate 1 x 1 with 5 Petals24866 | Pearl Gold | 2 | |
| Plate 1 x 1 Round with Tabs33291 | Pearl Gold | 2 | |
| Cone 1 x 14589 | Pearl Gold | 2 | |
| Plate 6 x 63958 | Dark Brown | 9 | |
| Total pieces | 205 | ||