All models

Toddler T-Rex: LEGO® DUPLO® building instructions for toddlers

A friendly upright T-Rex in big bricks for small hands, with a huge head, an open red mouth with white teeth, tiny arms, thick legs and a long tail, beside a volcano and jungle ferns.

38 parts 10 steps Beginner DUPLO®

Toddler T-Rex assembled model

Loading 3D model Check your connection and try again.

Drag to rotate. Pinch or scroll to zoom.

Build steps

Finished model

Drag to look around, then build it in 10 steps.

Step 1 of 10

  1. Step 1 · 4 pieces

    Tip Point both green feet toward the left end of the baseplate, side by side. The long plate for the tail goes near the right end, in line with the feet.

    • DUPLO® Plate 2 x 4 Green 40666 3×
    • DUPLO® Baseplate 12 x 16 Bright Green 6851 1×

About this build

Big head, little arms, open mouth: those three things are what most children picture when they hear "T-Rex", so this dinosaur is built around them. It stands upright on two thick legs, leans its huge blocky head forward and lets its heavy tail rest on the ground behind it. It is a different animal from the long-necked Toddler Dino: no neck at all, two legs instead of four.

The body is green with a yellow chest, and the jungle ground is a lighter green, so the dinosaur stands out clearly. The mouth is open: a white tile on the lower jaw makes the teeth, a red brick behind it is the inside of the mouth, and the upper jaw rests on that red brick, leaving a gap above the teeth. An eye brick sits on top of the head, and a short flat plate sticking out of the chest gives the tiny arms.

At a glance

  • 38 big pieces in 10 steps on a 16 × 12 stud baseplate
  • Open mouth with white teeth and a printed eye
  • Brown volcano with an orange lava flow, a tree, ferns and rocks
  • About 15–25 minutes for a toddler with a grown-up

Steps 6 and 8 are the tricky ones. The lower jaw and the upper jaw each stick far out in front of the body, so hold the long brick level while your child presses it onto the studs at the back.

The volcano behind the head goes up in step 9, and it makes a good stage for play: the T-Rex can stomp past the lava, hide behind the tree or nibble the ferns. For a quieter dinosaur, swap the red mouth brick for a green one and the mouth closes.

Step 1 of 10

Every piece is a standard LEGO® DUPLO® element, listed with its LDraw part number and color.

Parts list
PartName / IDColorQty
DUPLO® Plant Flower 4 x 4 x 1 with 5 Round Petals and 4 Top Studs15515 Green 1
DUPLO® Cone 2 x 2 x 2 Square Base with Bottom Tube16195 Green 1
DUPLO® Brick 2 x 62300 Green 2
DUPLO® Brick 2 x 2 x 231110 Green 2
DUPLO® Brick 2 x 23437 Green 6
DUPLO® Brick 2 x 2 with Eye with White Spot on 2 Sides Pattern3437pe1 Green 1
DUPLO® Plate 2 x 440666 Green 4
DUPLO® Brick 2 x 84199 Green 1
DUPLO® Plant Flower with 5 Petals and 1 Top Stud6510 Green 2
DUPLO® Slope 2 x 2 x 270676 Green 1
DUPLO® Brick 2 x 23437 Red 2
DUPLO® Baseplate 12 x 166851 Bright Green 1
DUPLO® Brick 2 x 23437 Yellow 2
DUPLO® Tile 2 x 2 x 0.56309 White 1
DUPLO® Cone 2 x 2 x 2 Square Base with Bottom Tube16195 Orange 1
DUPLO® Slope 2 x 2 x 270676 Orange 1
DUPLO® Brick 2 x 43011 Reddish Brown 2
DUPLO® Brick 2 x 23437 Reddish Brown 2
DUPLO® Slope 2 x 2 x 270676 Reddish Brown 3
DUPLO® Tile 2 x 2 x 0.56309 Light Bluish Grey 2
Total pieces38