Toddler Reindeer: LEGO® DUPLO® building instructions for toddlers
A friendly brown reindeer in big bricks for small hands, with tall branching antlers, a red nose, a white tail and a red harness with a gold bell, standing in the snow beside a sled of presents and two pines.
40 parts 11 steps Beginner DUPLO®
Loading 3D model Check your connection and try again.
Drag to rotate. Pinch or scroll to zoom.
Build steps
Finished model
Drag to look around, then build it in 11 steps.
Step 1 of 11
-
Step 1 · 1 piece
-
DUPLO® Baseplate 12 x 16 1×
-
-
Step 2 · 4 pieces
Tip Stand the four tall legs with their long side running left to right, two at the front and two at the back, with an empty row of studs between each pair.
-
DUPLO® Brick 1 x 2 x 2 Type 2 4×
-
-
Step 3 · 3 pieces
-
DUPLO® Brick 2 x 6 2× -
DUPLO® Plate 4 x 6 1×
-
-
Step 4 · 2 pieces
Tip The red harness plate sticks out two studs past the chest. Press its back end down hard first so the front stays level.
-
DUPLO® Plate 2 x 6 1× -
DUPLO® Tile 2 x 2 x 0.5 1×
-
-
Step 5 · 2 pieces
Tip The gold bell goes on the very front of the harness, and the thin neck stands one stud behind it so they do not touch.
-
DUPLO® Cone 2 x 2 x 1 1× -
DUPLO® Brick 1 x 2 x 2 Type 2 1×
-
-
Step 6 · 3 pieces
Tip The red nose goes at the front of the tan plate and the eye brick behind it. Check that the eyes face the sides, not the front.
-
DUPLO® Brick 2 x 2 1× -
DUPLO® Plate 2 x 4 1× -
DUPLO® Brick 2 x 2 with Eye with White Spot on 2 Sides Pattern 1×
-
-
Step 7 · 4 pieces
-
DUPLO® Brick 1 x 2 x 2 Type 2 2× -
DUPLO® Brick 2 x 4 1× -
DUPLO® Brick 2 x 2 1×
-
-
Step 8 · 6 pieces
Tip Each crossbar reaches outward from its stem. Put both crossbars on before adding the four tan tines, so the antlers stay balanced.
-
DUPLO® Brick 2 x 4 2× -
DUPLO® Brick 1 x 2 x 2 Type 2 4×
-
-
Step 9 · 2 pieces
-
DUPLO® Slope 2 x 2 x 2 1× -
DUPLO® Plate 2 x 6 1×
-
-
Step 10 · 4 pieces
-
DUPLO® Brick 2 x 2 1× -
DUPLO® Tile 2 x 2 x 0.5 1× -
DUPLO® Brick 2 x 2 x 2 1× -
DUPLO® Tile 2 x 2 x 0.5 1×
-
-
Step 11 · 9 pieces
-
DUPLO® Cone 2 x 2 x 2 Square Base with Bottom Tube 1× -
DUPLO® Brick 2 x 4 2× -
DUPLO® Brick 2 x 2 1× -
DUPLO® Cone 2 x 2 x 2 Square Base with Bottom Tube 1× -
DUPLO® Brick 2 x 2 x 2 with Curved Top 2× -
DUPLO® Brick 2 x 2 2×
-
About this build
A reindeer only needs two things to be recognized from across a room: a crown of antlers and, at Christmas, a bright red nose. This big-brick version leans on both. The antlers climb high above a reddish-brown head, and a single red brick sits right at the tip of the snout, where small builders spot it first and can name the animal straight away.
The body is kept slim on purpose. Four tall 1 × 2 bricks stand as legs, so the reindeer looks lighter on its feet than a chunky farm animal would. A red plate runs along its back as a harness and reaches forward over the chest to hold a gold bell, a little yellow cone. A white tile pokes out at the back for the tail, and the eye brick shows one round eye on each side of the head.
Each antler is a tan stem with a crossbar on top and two tines rising from it, one at the outer end and one straight above the stem. That gives them a branching shape without any fiddly pieces.
Around the reindeer, a red sled waits on the snowy white baseplate with a blue and a yellow present on board, a tall pine stands at the back corner, a small one behind the reindeer's head, and two snowdrifts fill the gaps.
At a glance
- 40 parts in 11 steps on a 16 × 12 baseplate
- About 15–25 minutes with a toddler helping
- Steps 7 and 8 need a grown-up's hand: the antlers stand tall and work best when pressed down firmly
For a quieter evening, leave the antlers off and the reindeer becomes a young deer grazing in the snow.
Parts list
How to read these instructionsEvery piece is a standard LEGO® DUPLO® element, listed with its LDraw part number and color.
| Part | Name / ID | Color | Qty |
|---|---|---|---|
| DUPLO® Brick 2 x 23437 | Blue | 1 | |
| DUPLO® Cone 2 x 2 x 2 Square Base with Bottom Tube16195 | Green | 1 | |
| DUPLO® Brick 2 x 43011 | Green | 2 | |
| DUPLO® Brick 2 x 23437 | Green | 1 | |
| DUPLO® Brick 2 x 23437 | Red | 1 | |
| DUPLO® Tile 2 x 2 x 0.56309 | Red | 1 | |
| DUPLO® Slope 2 x 2 x 270676 | Red | 1 | |
| DUPLO® Plate 2 x 698233 | Red | 2 | |
| DUPLO® Cone 2 x 2 x 2 Square Base with Bottom Tube16195 | Bright Green | 1 | |
| DUPLO® Brick 2 x 2 x 231110 | Yellow | 1 | |
| DUPLO® Cone 2 x 2 x 14378a | Yellow | 1 | |
| DUPLO® Tile 2 x 2 x 0.56309 | Yellow | 1 | |
| DUPLO® Brick 2 x 2 x 2 with Curved Top3664 | White | 2 | |
| DUPLO® Tile 2 x 2 x 0.56309 | White | 1 | |
| DUPLO® Baseplate 12 x 166851 | White | 1 | |
| DUPLO® Brick 2 x 43011 | Tan | 2 | |
| DUPLO® Plate 2 x 440666 | Tan | 1 | |
| DUPLO® Brick 1 x 2 x 2 Type 24066b | Tan | 6 | |
| DUPLO® Brick 2 x 62300 | Reddish Brown | 2 | |
| DUPLO® Plate 4 x 625549 | Reddish Brown | 1 | |
| DUPLO® Brick 2 x 43011 | Reddish Brown | 1 | |
| DUPLO® Brick 2 x 23437 | Reddish Brown | 3 | |
| DUPLO® Brick 2 x 2 with Eye with White Spot on 2 Sides Pattern3437pe1 | Reddish Brown | 1 | |
| DUPLO® Brick 1 x 2 x 2 Type 24066b | Reddish Brown | 5 | |
| Total pieces | 40 | ||