All models

Temple of Heaven: Step-by-step building instructions

An original build inspired by the Hall of Prayer for Good Harvests in Beijing, with three round blue roofs, red columns and lattice doors, a gold finial and a three-tier white marble terrace with stairs and balustrades.

246 parts 20 steps Advanced

Temple of Heaven assembled model

Loading 3D model Check your connection and try again.

Drag to rotate. Pinch or scroll to zoom.

Build steps

Finished model

Drag to look around, then build it in 20 steps.

Step 1 of 20

  1. Step 1 · 12 pieces

    • Tile 1 x 6 Light Bluish Grey 6636 8×
    • Baseplate 16 x 16 Dark Bluish Grey 3867 4×

About this build

The Hall of Prayer for Good Harvests stands in the Temple of Heaven park in southern Beijing, where Ming and Qing emperors came to pray for good harvests. From a distance it is three things stacked: a round timber hall, three round roofs of deep blue glazed tile, and a broad white marble terrace in three tiers. A gilded ball crowns the top roof.

This version keeps those three bands and pushes the colors hard. Each roof is an inverted dish in bright blue, 10, 8 and 6 studs across, so the tiers shrink as they climb. A dark turquoise round plate sits under every roof as the painted eave band. Below the lowest roof, twelve red round columns stand in groups of three around four dark red square-lattice doors, under dark red beams. The upper drums are round bricks in red and dark red, and the finial is a pearl gold round plate, sphere and cone.

The terrace takes most of the parts. Each tier is three layers of white plates with the corners cut back. A short white stair climbs each tier on all four sides. Lattice fences and round posts form the balustrades. Two dark bronze incense burners stand on the lower tier in front of the main stair, and dark green cone cypresses fill the corners of the grey courtyard.

At a glance

  • 246 parts in 20 steps
  • Four 16 x 16 baseplates, 32 x 32 studs in all
  • Height: about 16 bricks to the tip of the finial
  • About 60 to 90 minutes of building

Steps 2 to 10 are repetitive: three tiers of plates and stairs. The column rings in steps 11 to 13 need the most care.

Step 1 of 20

Every piece is a standard LEGO® element, listed with its LDraw part number and color.

Parts list
PartName / IDColorQty
Brick 2 x 2 Round without Reinforcement3941 Black 2
Cone 2 x 2 Truncated98100 Black 2
Dish 8 x 8 Inverted with Solid Studs3961 Blue 1
Dish 6 x 6 Inverted with Solid Studs44375b Blue 1
Dish 10 x 10 Inverted with Solid Studs50990b Blue 1
Plate 6 x 6 Round with Hole and Snapstud11213 Dark Turquoise 1
Plate 8 x 8 Round with Hole and Snapstud74611 Dark Turquoise 2
Brick 6 x 6 Round with Holes18897 Red 1
Brick 1 x 1 Round with Hollow Stud3062b Red 36
Brick 4 x 4 Round with Pinhole and Snapstud87081 Red 1
Plate 2 x 122445 White 12
Plate 6 x 123028 White 6
Plate 2 x 83034 White 12
Brick 1 x 1 Round with Hollow Stud3062b White 24
Fence Lattice 1 x 4 x 13633 White 16
Plate 1 x 63666 White 12
Plate 1 x 43710 White 24
Plate 8 x 841539 White 3
Plate 2 x 164282 White 24
Plate 16 x 16 with Underside Ribs91405 White 3
Brick 2 x 2 Round without Reinforcement3941 Reddish Brown 16
Tile 1 x 66636 Light Bluish Grey 8
Baseplate 16 x 163867 Dark Bluish Grey 4
Cone 2 x 2 x 2 with Hollow Stud Open3942c Dark Green 16
Cone 4 x 4 x 2 without Axlehole3943a Dark Green 4
Brick Round Sphere 2 x 2 x 1.667 with Stud20953 Pearl Gold 1
Plate 2 x 2 Round with Axlehole4032a Pearl Gold 1
Cone 1 x 14589 Pearl Gold 3
Brick 6 x 6 Round with Holes18897 Dark Red 1
Brick 1 x 43010 Dark Red 4
Fence Ornamented 1 x 4 x 2 with Square Lattice32932 Dark Red 4
Total pieces246